Official Show Your Engine Bay Pics!

[PontiacFan]

Does anyone know what I can do to remove, or cover that ugly brass fitting????
I think thats where the egr went? If I remove it, there will be a hole there.
Anything will help. Thanks.

Yea, swap to the LS6 design intake manifold.
There are other plug methods for the hole tho.
WS6store.com has this option;
ws6project.com/user_stor/catalog/product_info.php?products_id=2201

[Y2KArcticSS]

Does anyone know what I can do to remove, or cover that ugly brass fitting????
I think thats where the egr went? If I remove it, there will be a hole there.
Anything will help. Thanks.

For a quick fix I put a freeze plug in there, much less noticeable than whatever that is, and only like 3 dollars at the parts store


Sent from my iPhone

[ZeeS7o7]

[IMG][/IMG]

[stephen02ws6]

it still need a good cleaning again, but it just came out for the year

[Y2KArcticSS]

it still need a good cleaning again, but it just came out for the year

Very nice, don't see many f-body's running edelbrock intakes. That a victor jr.?


Sent from Eye Fone

[stephen02ws6]

Very nice, don't see many f-body's running edelbrock intakes. That a victor jr.?


Sent from Eye Fone

ya thats one of the reasons i wanted to run it. it is the victor jr intake with the ultra low profile elbow so it fit.

[99'CajunFirehawk157]

ya thats one of the reasons i wanted to run it. it is the victor jr intake with the ultra low profile elbow so it fit.

Did you have to cut the cowel any? or it cleared ok?

[stephen02ws6]

Did you have to cut the cowel any? or it cleared ok?

no it cleared ok. i had to use the ultra low profile one so it fit. you just have to bolt it together off the car first. the elbow wont fit over the studs with it on the car.

[hijinx]

The car has been down for the better part of 8 months, but I finally have it back I had the motor rebuilt with forged rods, pistons and arp bolts throughout. Also changed the intake and fuel system. When I got it back home I redid all the supercharger tubing and aftercooler plumbing and did the wire hide mod.

[pajeff02]

Wow!

[PontiacFan]

Last year:


This year;




It's like one of those puzzles, ..., Find the differences in the photos.
At first ya think, well I see a couple, ..., then a couple more, ...
I see at least 8.

[hijinx]

Thanks Jeff, I got the ambition to do the wire and cruise hide mod from you.

[SMWS6TA]

The car has been down for the better part of 8 months, but I finally have it back I had the motor rebuilt with forged rods, pistons and arp bolts throughout. Also changed the intake and fuel system. When I got it back home I redid all the supercharger tubing and aftercooler plumbing and did the wire hide mod.

what did you use to fill the holes from the wire clips? I like that idea. It really cleans that up.

I've also done the wire mod and I still have those holes.

[pajeff02]

Thanks Jeff, I got the ambition to do the wire and cruise hide mod from you.

It does look so much better with all that crap hidden.

what did you use to fill the holes from the wire clips? I like that idea. It really cleans that up.

I've also done the wire mod and I still have those holes.

I used some simple plastic push pins that I picked up at Carlisle. One nice thing about having a black car is that the color matched without painting so they blend in.

[hijinx]

Thats what I used, got them in the fastener section at Ace

[SMWS6TA]

I guess I'd have to paint them. Thx

[crimson_bird]

An old shot of mine. One of the weekends where i'm not feeling too lazy I need to get out and do some painting. Gonna get rid of a lot of the red and black it out for the most part.


Trans Am- Engine Bay by la-rue., on Flickr

[pajeff02]

Super clean!

[fbodyNATION]

my car at the dealer in dallas,tx the first day i got it

[fbodyNATION]

gotta get rid of that bloody EGR valve LoL!