Results 1 to 8 of 8
Thread: Converter
-
04-06-2010, 10:49 AM #1Junior Member
- Join Date
- Mar 2010
- Location
- San Diego, California
- Posts
- 52
Pewter- 2001 SS Convertible
Converter
What is a good stall or torque converter for a bolt on car? How much does it cost to get installed?
-
04-06-2010, 12:06 PM #2King 0f n00bz
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 37
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
look at yank converters ...one of the best if not the best...i have also herd good things about circle D.....for a bolt on look into the SS 3600....it is best to call yank and they will tell you exactly what you need...a yank converter is about 700-800 ..and i dont know install price as i will be installing it myself
-
04-06-2010, 12:16 PM #3Member
- Join Date
- Mar 2007
- Location
- NC
- Posts
- 421
NBM- 1998Z28
I just had my convertor swapped out by a local Tranny rebuilding shop. They charged me $250.00. You can usually figure 4 hours time X what they charge per hour. I got off real cheap since the people I know have done some rebuilds in the past for me. Percision Industries makes the Vigalante Convertors. Check them out along with Circle D and Yank.
TSP 347 SB, TSP Stage 2.5 PRC LS6, TSP MS4, Performabuilt Stage 2 4L60E, Yank PT4000, 4.11s, Fast 90/90, FTRA Cold air intake+all the free mods, Dynatech Supermaxx Exaust System, DMH Cutouts, Hooker Catback/FTRA Tips. Tuned by RPM/Garner NC. 11.28@119
-
04-06-2010, 05:02 PM #4igofast
- Join Date
- Nov 2005
- Location
- ALABAMA
- Age
- 46
- Posts
- 50
red with 35th le stripes- 2002 35TH LE
yank ss3600 and install it youself. its not hard to do.
-
04-06-2010, 05:33 PM #5Member
- Join Date
- Jun 2009
- Location
- coon rapids, MN
- Age
- 60
- Posts
- 404
red- 2000TA
calspeedperformance is selling Yanks for $600-700.ckeck for sponsors and vendors sales on ls1 webforums.
-
04-07-2010, 09:42 PM #6Junior Member
- Join Date
- Mar 2010
- Location
- San Diego, California
- Posts
- 52
Pewter- 2001 SS Convertible
Problem is I don't have access to tools right now. Is this something you can do with hand tools and in a drive way? I've always had manual cars.
Originally Posted by Brandon35thSS
How much faster is this going to make my car in the quarter mile?
-
04-08-2010, 04:04 AM #7Rockin the Ruckus!
- Join Date
- May 2008
- Location
- Line Lexington, PA
- Posts
- 2,670
NBM- 2002 z28 camaro
I am pretty sure on ls1howto.com there is a writeup. A jack, stands, and a few hand tools and you can change your owner converter Originally Posted by seamurda
-
04-08-2010, 07:00 AM #8King 0f n00bz
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 37
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
Depending on the stall and your mods .4 to 1 second in general Originally Posted by seamurda
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: PTC Converter
By new2dgame in forum Automatic TransmissionReplies: 4Last Post: 02-16-2013, 05:37 PM -
VIN to RPO converter
By fury78 in forum Camaro / SSReplies: 2Last Post: 04-22-2010, 05:40 AM -
PI Converter
By DeadZ28 in forum Parts For Sale / TradeReplies: 21Last Post: 05-22-2007, 06:50 PM -
N/A converter VS Nitrous converter????
By AutomagicLS1 in forum Automatic TransmissionReplies: 1Last Post: 09-25-2006, 07:37 AM -
cam and converter
By cjg454ss in forum Parts Wanted / TradeReplies: 1Last Post: 02-28-2006, 06:31 AM
Bookmarks