Show the backside of your camaro

[McNord@6LE]

Nice rims what size are they?

If your talking about me they are 18"x 12" rear & 18"x 10" front.

[tpilews]

Here is mine with the new emblems for under each taillight.

I normally don't like tips on camaros, but I really like the way yours come out the back and are tucked up real nice. Do you have any shots from directly behind? I used to have a red T/A, I miss having red. Black is a pain in the ass. Always looks dirty.

[FreakV6]

hows about a little v6 love

[10spokess]

looks killer what else is donr to the v6

[tito_ss_usmc]

Most people dump them before the rear axle. Not sure on cab noise.

just like mine and yes quite a bit of cab noise especially with the T-Top cover opened but I don't mind kinda bad pic though

[FreakV6]

looks killer what else is donr to the v6

Performance wise-

Abbot n/a cam
210/220 @ .050
.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
112 lobe separation
Comp Push hardened push rods
Comp 105# springs
Pacesetter headers
Aluminum D/S
Stage 3 clutch
Hurst short throw with lous short stick
410 gears
torsen diff
whisper lid
and prolly a bunch more of crap im forgetting lol

[Z28boy2000]

Performance wise-

Abbot n/a cam
210/220 @ .050
.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
112 lobe separation
Comp Push hardened push rods
Comp 105# springs
Pacesetter headers
Aluminum D/S
Stage 3 clutch
Hurst short throw with lous short stick
410 gears
torsen diff
whisper lid
and prolly a bunch more of crap im forgetting lol

now that is a freakV6

[SuperSport346]

Not the best pic, but it's updated with taillight covers and letter inserts:

[10spokess]

Performance wise-

Abbot n/a cam
210/220 @ .050
.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
112 lobe separation
Comp Push hardened push rods
Comp 105# springs
Pacesetter headers
Aluminum D/S
Stage 3 clutch
Hurst short throw with lous short stick
410 gears
torsen diff
whisper lid
and prolly a bunch more of crap im forgetting lol

what power you putting down

[chuckie669]

Not sure what I am going to do with the valance on the back yet, may try to turn it into a diffusor or something but it needs to go since I now have the true duals dumped right in front of the rearend.

I'd really like another angle or two on your car. I've thought about a white and green before and never actually seen done before. Now I'd be a copycat.

[McNord@6LE]

I'd really like another angle or two on your car. I've thought about a white and green before and never actually seen done before. Now I'd be a copycat.

Here you go

[Z28boy2000]

one of my favorite shots

[10spokess]

that is a good pic i can see houses in the tail light

[2K2SLPSS]

[bluefields88]

one of my favorite shots

Is that a knock off spoiler or did you fill in the gap along the top of it?

[tatertot91]

Is that a knock off spoiler or did you fill in the gap along the top of it?

Z28 with SS badges!!!

[bluefields88]

Z28 with SS badges!!!

[Z28boy2000]

yeap it is a Z with badges, and that is not an OEM spoiler


not really into the whole debate on SS badges on a Z

[FreakV6]

what power you putting down

will know for sure soon, just gotta finish breakin. i would say somewhere in the 230-240 range at the rear wheels.

[karpetcm]