what y fits with ebay headers good?

**damianj03** · 02-28-2010, 01:54 PM

Originally Posted by damianj03

yeah i hope if not i will take it to a shop and pay more money to get it modded to fit.

does anyone know where to get good exhaust clamps/ bands

and also what size i would need i have 3in collectors, 3" y and SLP LM2 would like to know if any of these things come with clamps

I also want to get msd cables anyone know the part number for them and good plugs to

thanks for the help

still wondering about this too?

**JoshuaGrooms83** · 02-28-2010, 02:01 PM

I got my SS band clamps from summit through ebay. But you can get all kinds on ebay. just type it in and pick which one you want.
heres some Part #s
Band clamps Stainless Steel Lap joint - SUM-692300
MSD Wires - MSD Plug Wires #32813 for Vette/F-Body/GTO w/LS1 Engine
NGK spark plug - TR5IX stock #7397 (these are the iridium tips)
NGK - tr55 (regular)
hope this helps a little.

**damianj03** · 02-28-2010, 03:45 PM

thanks bro

**JoshuaGrooms83** · 02-28-2010, 03:48 PM

Originally Posted by damianj03

thanks bro

No prob

glad I could help

**damianj03** · 03-01-2010, 03:23 PM

anybody using o2 extension cables with their lt's if so what lengths will fit the DPT ebay headers

**JoshuaGrooms83** · 03-01-2010, 06:01 PM

Originally Posted by damianj03

anybody using o2 extension cables with their lt's if so what lengths will fit the DPT ebay headers

I seriously recommend just using the Bosch 13111s. No need to buy extentions cause they are already on the O2 sensor. Plus, you know your new sensor shouldnd have any defects nor the wiring. Some of the wire extentions out there are kinda iffy if oyu ask me. Thats why i got the vette 02's. The hook right up.

seach in ebay again and put in
Bosch 13111. if you buy, make sure you dont pay more than $80 each. I got mine for $50 each. At a parts store they are around $90-100 ive seen

**damianj03** · 03-01-2010, 06:43 PM

it says that these are the bosh 13111
are they and will they work?

http://cgi.ebay.com/ebaymotors/BOSCH...item5190a2b064

**JoshuaGrooms83** · 03-01-2010, 07:03 PM

Originally Posted by damianj03

it says that these are the bosh 13111
are they and will they work?

http://cgi.ebay.com/ebaymotors/BOSCH...item5190a2b064

You got yourself some o2 sensors, and for $46 i would jump on them. About the same price i payed after shipping and handling. Check to see if there are any onther cheaper ones and then snag em up. Exactly the one i bought

**damianj03** · 03-02-2010, 03:25 PM

just got my new headers and y pipe in today only took 4 days counting the weekend pretty fast shipping no gonna post pics cuz we have all seen what they look like ebay headers and lpp y everything checks out and looks fine to me

update
mailed PCM to frost on monday 1 mar
ordered slp lm2 cat back today 2 mar
ordered bosch 13111 today 2 mar
gm header gaskets today 2 mar
egr/air block off plate set 2 mar and clamps for the pipes but what size would fit

**damianj03** · 03-02-2010, 04:16 PM

what i mean is will a three in band clamp fit a 3 inch pipe where the collector slides into the y and also where the y slides into itself or do i need to go to 3.5 inch clamps

**JoshuaGrooms83** · 03-02-2010, 05:00 PM

Originally Posted by damianj03

what i mean is will a three in band clamp fit a 3 inch pipe where the collector slides into the y and also where the y slides into itself or do i need to go to 3.5 inch clamps

When you get bandclamps make sure you get 3" lap joint band clamps, not butt joints. Lap joint band clamps help seal the slip fit joints create. Its still a 3" joint you just have one as a 3"outer going onto a 3"inner. if that makes any sense lol It forms to the joint better. for example....
A long tube colloctor sliping into a 3"ypipe. There gonna be a slight gap where the two joints creat there for a lap joint band clamp will better form to the joint. If anyone has ever done welding you know what i mean lol. When i get my car back in the air ill take a pic of it unless someone has one avalible.

**damianj03** · 03-02-2010, 06:09 PM

ok so i need lap joint band clamps. you know where i can get em?

oh and thanks for all the help its been a big help

**damianj03** · 03-02-2010, 06:48 PM

just got 3 of the joint lap band clamps and the egr and air block off plates oh yeah

**Ws6islife** · 03-02-2010, 07:28 PM

ok so i cannot find the darn lpp site can you help lol im problably over looking it..

**JoshuaGrooms83** · 03-03-2010, 06:00 AM

Originally Posted by Ws6islife

ok so i cannot find the darn lpp site can you help lol im problably over looking it..

They are on ebay.
Look up LS1 y pipe in the search bar they are stainless so look fo the good pictures. Sometime they dont have LLP in the item descriptiopn. They have a catted and a ORY

**jerri311** · 03-05-2010, 10:02 AM

my pacesetters and texas speed y pipe fit well together.

**damianj03** · 03-06-2010, 01:45 PM

so far i have recieved my headers, ory, egr/air block off plates, and 3" lap band clamps

still waiting for my slp lm2, pcm to return from tune, and my bosch 13111 o2s probably wont get any of these until monday or tuesday no to worried about time because i just soaked my stock exhaust bolts with pb blaster i hope this will ease removal and not give me any broken bolts

**JoshuaGrooms83** · 03-07-2010, 09:59 AM

Originally Posted by damianj03

so far i have recieved my headers, ory, egr/air block off plates, and 3" lap band clamps

still waiting for my slp lm2, pcm to return from tune, and my bosch 13111 o2s probably wont get any of these until monday or tuesday no to worried about time because i just soaked my stock exhaust bolts with pb blaster i hope this will ease removal and not give me any broken bolts

oh yeah

you might break a few on the old mainifold to cat bolts but other than that. all the others should be a piece of cake. A little muscle and they shoudl break loose. I have a 98 will 100K when i got my stuff off and i didnt heve to cut or torch anything. Remember to run your car a little before your install.

**bberretta** · 03-07-2010, 10:06 AM

Just ordered my headers (got the lsextreme ones off ebay that have the egr and air crap removed), gaskets, O2 sensors, and Percy split header bolts (going to try them instead of Stage 8's this time.) Still trying to decide on a Y that will fit well.