LS1performance parts for sale

[maxwax]

I have a set of 241 heads that have been CNC ported bowls blended chambers cnc'd with comp 918 springs, with sodium filled exhaust valves,and stainless intake valves, thees heads have been flowd and flow 0ver 300cfm at .600lift.

I had them paired up with a vindicator cam ,ls6 intake and long tubes, on a stock bore ls1 and it made 428 hp to the tires,and ran 7.75 in the 1/8th in a
full weight convertible 99 camaro with a yank ss3600 converter and a 3.42 gear.

lots more parts, call me with any questions. 770 301 2693.

over $1,200 invested in the heads will take 600.or will consider trades

[QuicSS]

how many miles were put on these heads?

[maxwax]

how many miles were put on these heads?

10k

[slow-v6]

Pics??

[Y2K_CAMARO]

I'm intrested in the heads. Why did they come off the car?

[maxwax]

I'm intrested in the heads. Why did they come off the car?

sorry guys as some of you know from a post I made earler ,my engine spun a rod bearing, but I have since traded what was left of the car including the heads for a running 2001 Z28,so therefore I only have a wet nos kit and a complete 10 bolt wit 4.10 gears left.

[Y2K_CAMARO]

Oh well, thanks anyways. Hope this Z28 works out for you

[02Sweet]

sorry guys as some of you know from a post I made earler ,my engine spun a rod bearing, but I have since traded what was left of the car including the heads for a running 2001 Z28,so therefore I only have a wet nos kit and a complete 10 bolt wit 4.10 gears left.

hmmm...... what kind of wet kit and how much?

[zeus]

would you consider just selling the 410 gear ? if not how much for the whole setup ? thanks

[ascottb38]

do you have an ls1 oil pan & pick-up?

[99LsOne]

would u sell the yank 36? if so how much

[erollinc]

who did the work on the heads? whats the compression on a stock ls1