9" vs 12 bolt

[9t8z28]

Nothings really wrong with it, It is a DTS housing with moser axles and center section. It does whine slightly at about 55 mph. Im swaping the 3.73's out for 4.11 before summer. I guess my opinion was soley based on,

You have heard of people with M6 breaking 12 bolts. I dont think I have ever heard of a M6 breaking a 9". Im sure it has happened. Thats my only view on it.

Well you are lucky enough to get a car with something better than a 10 bolt

[Itllrun]

look I'm stock may order headers and Y pipe if I get some help finding the cheapest 1 7/8 kooks header and y tonite how ever I plan On big cam and possible high spray with high stall I know its not a M6 but wouldn't I be better off with aN 9" From MOZER??????

[allbaugh_04]

New, yeah almost, but used the 12 is far cheaper

how much is a used 12-bolt?

[camarojunky74]

look I'm stock may order headers and Y pipe if I get some help finding the cheapest 1 7/8 kooks header and y tonite how ever I plan On big cam and possible high spray with high stall I know its not a M6 but wouldn't I be better off with aN 9" From MOZER??????

what are your goals, you listed your mods, you plan on 4 link? big tires? spraying off the line, tons of things to consider, but i really dont think a lot of people with big power that think they need a 9'' can even hook well enough to need that much gear, maybe its just me being pessimistic but i think alot of people over do things.

[9t8z28]

how much is a used 12-bolt?

Around 1K complete

[allbaugh_04]

very affordable imo...

can you get them the same width as a 10-bolt?

(for aftermarket wheel fitment issues)

[chuckie669]

Around 1K complete

where can you find a used moser? I've been keeping an eye on craigslist/ebay for awhile, but nothing around me.

[INMY01TA]

Used 12 bolts I see are typically $1,600.

[camarojunky74]

where can you find a used moser? I've been keeping an eye on craigslist/ebay for awhile, but nothing around me.

your in texas and cant track down a 12 bolt? lol keep searching im sure something will come up.

[chuckie669]

your in texas and cant track down a 12 bolt? lol keep searching im sure something will come up.

I apparently suck at searching.

[camarojunky74]

here you go 500 more dollars and your set
http://dallas.craigslist.org/dal/pts/1054235149.html


email these guys see if they wanna part theres off, for yours + some cash
http://houston.craigslist.org/cto/1028676435.html

http://houston.craigslist.org/cto/1012431122.html

[shady milkman]

i am pretty sure that 12 bolt does not bolt in

[camarojunky74]

i am pretty sure that 12 bolt does not bolt in

no your right, may need to be shortened. a new carrier gears posi and yoke will deff be needed, but nothing crazy, and get the umi tq arm adapter

[zmg00camaross]

well danny miller rear gears makes a 9 inch houseing for f body which come with moser axle for $1000 and I build a 3rd member myself totally I spent $1500 on a bulletproof rearend build yourself and save some money

[camarojunky74]

great tip thanks. where did you get your 3rd member from?

[ebdboudreaux]

damn now you all have me re-debating between which 2 to get...

[shady milkman]

just be careful on the moser 12 bolts..they have been known to have the bolts back out of the torque arms..THIS IS JUST WITH THEIR 12 BOLTS

[zmg00camaross]

great tip thanks. where did you get your 3rd member from?

I found my 3rd member from a friend that said his neighbor cousin had the 3rd but I looked on eBay craigslist and raceingjunk and found a ton of them but the one I bought had 4.56 gears so I trying those out if I hate them the I just redo it with 4.10 but I wouldn't pay the $2500 I rather save a grand a do it myself

[camarojunky74]

just be careful on the moser 12 bolts..they have been known to have the bolts back out of the torque arms..THIS IS JUST WITH THEIR 12 BOLTS

loctite owns son

[shady milkman]

loctite owns son

they have still been known to walk out..even with loctite..something with the 4 bolts instead of 2 all the way through