LSX 434 Twin Turbo Project Pictures!

[Stone]

15lbs with that setup should have you running for a while. Like you said....better safe than sorry. Im sure your trying to stay away from the Meth too? Im not running any on mine when i put the APS kit on. Whatever it makes, it makes

[RedVertTA]

Finally some updates I was beginning to worry whether or not this thread was dead. BTW whats the grind on that cam?

[GORILLAVETTE]

15lbs with that setup should have you running for a while. Like you said....better safe than sorry. Im sure your trying to stay away from the Meth too? Im not running any on mine when i put the APS kit on. Whatever it makes, it makes

Don't really like meth or allky. Too much depends on a cheap little pump that can go out at anytime. Just not a fool proof system for a 20 grand investment. Boy...I bet I catch shit on that!

[GORILLAVETTE]

Finally some updates I was beginning to worry whether or not this thread was dead. BTW whats the grind on that cam?

No it's just kind of in a few things today and then things stop for a day or two.
I will have to check with the builder on the grind. I don't remember exactly what the specs were but there was plenty of lift...in the 630 range if I remember correctly. It's not going to be a radical cam but a cam for turbos.

[picsbypenny]

i WANT.. nice car!!!

[side2000]

Don't really like meth or allky. Too much depends on a cheap little pump that can go out at anytime. Just not a fool proof system for a 20 grand investment. Boy...I bet I catch shit on that!

meth 'n alky = junky.

don't make your motor a junky. it'll be happy w/ pump gas and nothing you ever see on street is gonna remotely contend with that thing as it is.

[RedVertTA]

No it's just kind of in a few things today and then things stop for a day or two.
I will have to check with the builder on the grind. I don't remember exactly what the specs were but there was plenty of lift...in the 630 range if I remember correctly. It's not going to be a radical cam but a cam for turbos.

That's a lot of lift for a turbo motor.

[Stone]

Don't really like meth or allky. Too much depends on a cheap little pump that can go out at anytime. Just not a fool proof system for a 20 grand investment. Boy...I bet I catch shit on that!

AMEN! Everyone told me to go Alky when i had my Srt-4. Fuck that! Ive known too many people to have the pumps go out then BAM! Bye bye motor!

[side2000]

That's a lot of lift for a turbo motor.

i'd say it's pretty proportional to his setup.

[RedVertTA]

i'd say it's pretty proportional to his setup.

Well yeah for his displacement but generally turbos don't like much lift, I'd say he's about at the mark where any more could be bad.

[side2000]

any more would be 'bout damn near impossible to utilize with a hydraulic setup.

[qwkgto]

Don't really like meth or allky. Too much depends on a cheap little pump that can go out at anytime. Just not a fool proof system for a 20 grand investment. Boy...I bet I catch shit on that!

My tuner says same thing ,tune car to run where its at,after that run race gas at track tune for that,never tryed alky, some guys swear by it.GN guys have ran it for years.

[side2000]

i have another MAF for a little added timing when i run race gas.

[GORILLAVETTE]

That's a lot of lift for a turbo motor.

I could be off on that....so don't hold me to it. I am getting the grind exactly tomorrow. Thanks for the interest.

[qwkgto]

i have another MAF for a little added timing when i run race gas.

I threw the thing away a long time ago SD all the way.

[chevychad]

badass build man!

[RedVertTA]

I threw the thing away a long time ago SD all the way.

What's SD stand for?

[side2000]

speed density

[RedVertTA]

speed density

Thanks.

[side2000]

Thanks.

no problem