Results 1 to 10 of 10
Thread: NoS Dry Kit Install
-
01-02-2009, 10:31 AM #1
NoS Dry Kit Install
I installed my own NOS Dry kit and was the easiest power adder known to man! On Bang for the buck it cant be beat! And if you have the self restraint to use ONLY the 75HP jets and to ONLY use it when you are losing..... it wont hurt your motor. Frequent use though will obviously have adverse effects.
I did an air fuel mixture check on it at WOT while on the dyno and you wont have to up the fuel to compensate for the NOS w/ just 75 jets, but any more than that without uping the air fuel and you WILL DO DAMAGE ! The throttle body screen can richen up the mixture for you. that enough to compensate at that amount but anymore and you need to have the computer reprogrammed per Atlanta Chassis Dyno. You get a TRUE real world 75HP from it though! NOS is very accurate in their jet HP results. I was really impressed with their out of the box ease of installation and straight forward instructions too.
Just FYI ...I highly recommend the remote bottle valve. One must always be ready for the ricers!
Happy spraying !
Chekm8
-
01-02-2009, 11:19 AM #2
Umm...
Welcome?
Check out the Nitrous Section...
-
01-02-2009, 03:40 PM #3
welcome
welcome to the site, im runnin a dry kit on my 99 z i love it it makes for a lot of fun.
-
01-02-2009, 04:19 PM #4
-
01-11-2009, 11:23 AM #5
Whatever clown im probably older than you! Im 36 !
-
01-11-2009, 01:02 PM #6
-
01-11-2009, 05:57 PM #7
- Join Date
- Jan 2009
- Location
- Dallas, Texas
- Posts
- 194
PEWTER- 2002 Camaro Super Sport
lol.......Welcome
-
01-11-2009, 07:46 PM #8
wa do you guys think i have to do to be able tu run a 175 shot, is of off my homeboys grand national he sold it, so he is selling me his nos kit.
-
01-12-2009, 06:00 AM #9
Check out the Nitrous Section...
-
01-14-2009, 05:33 PM #10
- Join Date
- Jun 2008
- Location
- Orlando FL
- Age
- 35
- Posts
- 1,045
Red+White Top and Stripes- 2000TransAmConvertible A4
You shouldn't need the nitrous to leave behind ricers.
FAST 90/90, SLP Lid, Kooks JetHot Coated LT's, American Racing Y-Pipe+Magnaflow Cats, DHM Electric Cutout, Flowmaster American Thunder Catback, HP Tuners Software, 343 rwhp.
BMR Convertible Subframe Connectors, Hotchkis Strut Tower Brace, BMR Driveshaft Safety Loop.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2002 Firebird Trans Am / Install 7.5-7.625-4:10 gear install
By Buick455 in forum Automatic TransmissionReplies: 3Last Post: 07-09-2015, 05:17 AM -
Griffin radiator install, stand up radiator install
By 02Sweet in forum External EngineReplies: 12Last Post: 06-03-2012, 05:00 PM -
Install shop or DIY header install?
By dethinboots in forum External EngineReplies: 7Last Post: 09-24-2011, 06:35 PM -
Install help
By ChadSheehy in forum General HelpReplies: 5Last Post: 05-04-2010, 05:43 PM -
Bayarea...Nitrous install? recommend me a shop or member to do the install? Price?
By 2klude in forum Western MembersReplies: 5Last Post: 04-11-2007, 09:30 PM
Bookmarks