Flowmaster exhaust but what do I do next

**JoshieDoom** · 12-07-2008, 07:01 PM

Originally Posted by shady milkman

the cut outs just created to many raddles for me...so i capped it and fell back in-love with my magnaflow's mean 1/2 throttle sounds

Yeah mine vibrates everything in the car. It sucks

**shady milkman** · 12-07-2008, 07:04 PM

Originally Posted by JoshieDoom

Yeah mine vibrates everything in the car. It sucks

my center console rattles when mine is open...i took mine apart and tightened everything up but still shakes..i think some type of rubber washer on the bolts would solve most of the rattles..

**JoshieDoom** · 12-07-2008, 07:19 PM

My gear selector rattles, the little plastic tabs that move with the shifter. Ive heard a turndown will solve most of these...

**Bouvers** · 12-07-2008, 09:17 PM

here is a list of things that you should do in order of priority in my opinion.

-SFC
-Lid
-LT/ORY
-CutOut (or a high flowing catback *Corsa, Magnaflow*)
-Port&Polish TB
-Stall
-LS6 Intake

**sunsetorangess** · 12-08-2008, 01:13 AM

Originally Posted by NavdeepWS6

i would like to know why ditch the filter and my 2 cents are new ring and pinion if its an auto get 3.73 manual 4.10 and headers with Y pipe or
nitrous like a 100 shot to be on the safe side

Just my opinion and experiance, havent had any luck personaly and the oil from the filter has caused nothing but issues. Have had to remove plenty of them and clean the Maf and TB because the oil gummed everything up.
On the dyno the paper flow's just as well as a K&N.
J

**NavdeepWS6** · 12-08-2008, 01:46 AM

Originally Posted by sunsetorangess

Just my opinion and experiance, havent had any luck personaly and the oil from the filter has caused nothing but issues. Have had to remove plenty of them and clean the Maf and TB because the oil gummed everything up.
On the dyno the paper flow's just as well as a K&N.
J

koo thanks didnt know that and got the filter but ill stick with it

**mark21742** · 12-08-2008, 03:06 AM

Originally Posted by sunsetorangess

Just my opinion and experiance, havent had any luck personaly and the oil from the filter has caused nothing but issues. Have had to remove plenty of them and clean the Maf and TB because the oil gummed everything up.
On the dyno the paper flow's just as well as a K&N.
J

I don't have a lid (GTO) but I ditched the K&N oiled cone filter for a generic dry paper cone.....less than half the price snd I like it a lot better

**Durango** · 12-08-2008, 07:24 AM

Originally Posted by Bouvers

here is a list of things that you should do in order of priority in my opinion.

-SFC
-Lid
-LT/ORY
-CutOut (or a high flowing catback *Corsa, Magnaflow*)
-Port&Polish TB
-Stall
-LS6 Intake

Right on that's what I'm looking for

**Durango** · 12-08-2008, 07:54 AM

Originally Posted by tonyjnjz

front page of the site...scroll down...lol

LOL Ok ok I just started here. I should learn to look before I pronounce myself point taken.

**Durango** · 12-08-2008, 07:57 AM

Originally Posted by shady milkman

thing to do next after flowmaster exhaust???....get a new exhaust

Just bought the car and the exhaust is new. Ant reason why?
I'm not familiar with the exhaust but it sounds pretty good to me. Has to be better than stock....

**shady milkman** · 12-08-2008, 08:35 AM

Originally Posted by Durango

Just bought the car and the exhaust is new. Ant reason why?
I'm not familiar with the exhaust but it sounds pretty good to me. Has to be better than stock....

it is better then stock..how much is debatable..most buy flowmasters for sound. thats cool..i'm just from the camp of flow the best numbers and sound second

**0verkill** · 12-08-2008, 11:52 AM

there is a member in the for sale area with pacesters long tubes and ory for sale.

**shady milkman** · 12-08-2008, 12:43 PM

Originally Posted by JoshieDoom

My gear selector rattles, the little plastic tabs that move with the shifter.

yea mine do too..later on when i am refreshing my interior i think i am going to get a shift boot from a grand am ..or a vette so i can replace that plastic shit.

**Durango** · 12-09-2008, 11:16 AM

Originally Posted by 01 T/A

there is a member in the for sale area with pacesters long tubes and ory for sale.

Thanks. I'll look at it.

Would it be a lot louder than what I have now. I'm from the school of not to loud when your cruising but let it loose when you hammer it. Right now cruising around is pretty loud from where I'm sitting. I was sure that my cat back would be a good system. It seems to FLOW well, pardon the punt.