Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 50
  1. #21
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    Quote Originally Posted by third_shift|studios View Post
    Serious Post:

    I have them in the Phoenix...they are gapped improperly from the manf. and my car has a terrible hiccup b/c of it. I figured a closer gap would mean it could rev faster b/c the electricity had less distance to travel therefor ignighting the fuel quicker. Turns out, I'm just running rich as hell


    SO, when i switch them out this winter, do i have to run any kinda "cleaner" to get any unburnt crap out of my cylinders?
    You really bought them?

  2. #22
    MANWHORE TEAM suede's Avatar
    Join Date
    Apr 2007
    Location
    Your Mom's Bedroom
    Posts
    4,548

    Negro
    2000 Trans Am WS.6

    Quote Originally Posted by Sarge View Post
    Send me money for your power gains!!!!!! Supply is running out! ACT NOW.
    Look at these endorsements pouring in from all over the world for my WeaponX Spark Plugs.
    Burns is alive?!?

  3. #23
    Senior Member
    Join Date
    Sep 2005
    Location
    rochester,ny
    Age
    48
    Posts
    2,665

    pewter
    2001 z28 lingenfelter 383

    Quote Originally Posted by third_shift|studios View Post
    Serious Post:

    I have them in the Phoenix...they are gapped improperly from the manf. and my car has a terrible hiccup b/c of it. I figured a closer gap would mean it could rev faster b/c the electricity had less distance to travel therefor ignighting the fuel quicker. Turns out, I'm just running rich as hell


    SO, when i switch them out this winter, do i have to run any kinda "cleaner" to get any unburnt crap out of my cylinders?

  4. #24
    formally 01 T/A 0verkill's Avatar
    Join Date
    Jul 2007
    Location
    San Diego ca
    Posts
    2,253

    "Arrest Me Red"
    2001 trans am

    i remember that guy and his crap he tryed to be a sponser till sarge made him cry.

  5. #25
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,745

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    Fucking worthless..

    just like the slp smooth bellows i just bought on the cheap

  6. #26
    Simpsons Did it!! 98formy's Avatar
    Join Date
    Mar 2007
    Location
    Minnesota
    Age
    44
    Posts
    596

    83 Z28 new project
    98 Formula WS7-sold:(

    What ever happened to that guy that was on here promoting those? Didn't he have some troll accounts also? Hearing this again reminds me of that guy who "developed" an infiniate increase in horsepower by recirculating the exhaust into the intake, that drawing was a classic.

  7. #27
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    He slithered over to some Mustang forum and they all licked his ass and called me a ignorant Nazi and stuff. mrr23 went over there and raised some shit.....but that was about it.

  8. #28
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    Quote Originally Posted by third_shift|studios View Post
    Serious Post:

    I have them in the Phoenix...they are gapped improperly from the manf. and my car has a terrible hiccup b/c of it. I figured a closer gap would mean it could rev faster b/c the electricity had less distance to travel therefor ignighting the fuel quicker. Turns out, I'm just running rich as hell


    SO, when i switch them out this winter, do i have to run any kinda "cleaner" to get any unburnt crap out of my cylinders?
    Dude, Seriously?

  9. #29
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    44
    Posts
    21,720

    My life is a
    Ben Stiller movie.

    Quote Originally Posted by Hi-Po View Post
    Dude, Seriously?
    i wouldn't ask if i wasn't serious.

    didn't buy them. he asked me to "test them" for him and write a feedback response on ls1.com but he allready got booted by then so i never did.

  10. #30
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    44
    Posts
    11,020

    white
    90 Mustang 5.0

    Quote Originally Posted by third_shift|studios View Post
    i wouldn't ask if i wasn't serious.

    didn't buy them. he asked me to "test them" for him and write a feedback response on ls1.com but he allready got booted by then so i never did.
    So Jaison, how would you rate these fine products?

    Try removing them, setting them to the proper gap (are they gappable?) and see if the miss goes away, when it doesnt, tell the guy what a fuckin piece of shit he is for selling you rebadged bosch garbage and buy the ngk's or autolites for a much cheaper price. Always set it to the factory gap unless you have a built motor that necessitates a different gap. Smaller gap for forced induction etc

  11. #31
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    44
    Posts
    21,720

    My life is a
    Ben Stiller movie.

    he claimed they are at .030 for F/i cars...he told me that AFTER i put them in.

  12. #32
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    44
    Posts
    21,720

    My life is a
    Ben Stiller movie.

    but yeah, i'm gonna get the NGks and new plug wires, i was just worried if there is anything i should do to clean out the cylinders?

  13. #33
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    44
    Posts
    11,020

    white
    90 Mustang 5.0

    Quote Originally Posted by third_shift|studios View Post
    but yeah, i'm gonna get the NGks and new plug wires, i was just worried if there is anything i should do to clean out the cylinders?
    nah. just get rid of the misfire and run it hard. itll clear out. But you dont want the engine misfiring for an extended period of time and have unburt fuel plug your cats up.

  14. #34
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    44
    Posts
    11,020

    white
    90 Mustang 5.0

    Quote Originally Posted by third_shift|studios View Post
    he claimed they are at .030 for F/i cars...he told me that AFTER i put them in.
    THis is a lesson learned that you should just double check before you put spark plugs in. I never trust what the gap is till i set it. Even then a spark plug gapper is not an exact science.

  15. #35
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    44
    Posts
    21,720

    My life is a
    Ben Stiller movie.

    i don't have any cats.

  16. #36
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,745

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    You should send them to me and Ill stick them in the test engine and see if I cant destroy them

  17. #37
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    44
    Posts
    11,020

    white
    90 Mustang 5.0

    Quote Originally Posted by third_shift|studios View Post
    i don't have any cats.
    Then dont worry about it, just run the fucker out hard, get rid of the misfire and change the oil earlier till you get rid of the miss. You dont want unburnt fuel in your oil either.

    cliffs notes: fix the misfire

  18. #38
    Rollo Tomassee AKIRA's Avatar
    Join Date
    Aug 2005
    Location
    Outside the box
    Age
    46
    Posts
    2,884
    I just got a hard on. It was from reading this thread. Thanks Weapon X! Wait until you get your claws!

  19. #39
    - STOCK ish - Sarge91's Avatar
    Join Date
    Apr 2008
    Location
    Fairhope, Alabama
    Age
    35
    Posts
    779

    Black
    2002 Camaro SS SLP

    Is this a joke?? Or are WeaponX Spark Plugs really good?
    2002 Camaro SS A4 - SLP# 2951 l MS4 l LT's w/ORY l F.A.S.T 78 & TB l Borla l Cutout l CME l TCI 3500 l 3.23's l !emissions l !sway

  20. #40
    lmpounded SandmanWs7's Avatar
    Join Date
    Jan 2006
    Location
    Dallas, Texas
    Posts
    8,030

    Silver
    2007 CTS-V

    Quote Originally Posted by Sarge91 View Post
    Is this a joke?? Or are WeaponX Spark Plugs really good?
    They are so good that if they fail all you have to do is order the part that needs replacement

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Enerpulse Pulstar Spark Plugs - Supersize Your Spark
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 03-15-2013, 09:00 PM
  2. What kind of oil 5w30& spark plugs&spark plug wire
    By ROMERO98Z28 in forum General Help
    Replies: 20
    Last Post: 09-01-2009, 01:50 PM
  3. WeaponX Performance Iridium Spark Plugs
    By punisherTA in forum Parts Review
    Replies: 6
    Last Post: 06-14-2008, 03:26 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •