Trick Flow 515 Package Results

[rc74racer]

The tuner is one of the best in S. Florida. He charges a lot but he also does it right. He is a Corvette specialist. I was also thinking I would be closer to 475 RWHP. If I would have known, I would have had LT's put on durring the install. I didnt think that my open exhaust with my headers would have made that big of a difference. I am still trying to figure it out if it was worth it. I spent around $6500 total for this package / install. I probably could have got more RWHP with a Vortec of Pro Charger for about the same price.

Including install the price isn't too bad considering the quality components you got and the package lived up to the numbers despite installing shorties.

I can't believe your installer/tuner didn't recommend you go with LTHs those shorties really hold you back. You now have really good heads and a great intake TB system. If you want more power you are just a LTHs and a cam swap away from having a 500rwhp NA motor so I wouldn't get to caught up in you could have done this or that. The only regret you should have are those shorties.

[0verkill]

the kit he instaled had a cam with it. did it come with the rockers or not? and how is the ideal with that cam?

[Killer_bluebird]

the kit he instaled had a cam with it. did it come with the rockers or not? and how is the ideal with that cam?

He mention cam because that cam is fairly tame. So a bigger bump stick along with Headers will push him in the 500rwhp area.

Personally Enjoy your set up as is. When you come across extra cash in a year or so do the headers but don't sweat it for now.

[vbcamaro89]

^ +1

[BADASS2000SS]

Alright already. I get the point. At the time, they were better than stock manifolds and a lot cheaper than Lt's. The heads came with rockers, and I have no clue what the car drives like yet, I pick it up tomorrow. I apreciate the other postive comments from you guys though, thank you. I will post the full dyno sheet soon.

[9t8z28]

Alright already. I get the point. At the time, they were better than stock manifolds and a lot cheaper than Lt's. I apreciate the other postive comments from you guys though, thank you. I will post the full dyno sheet soon.

Sorry, but there was another thread started by another member on this forum and he was installing the same kit but he left us high and dry when it came time to posting his numbers. No offense to you, but some members like me were real disappointed.

I am glad to see someone installed this kit.

So how do you like it besides being a little disappointed?

[BADASS2000SS]

That other post was also started by me. At that time, I ordered the parts and sent my car away thinking it would only be a few weeks. Six months later, I still dont have all the results or the car back. A lot of things happened to my installer / tuner that made this project take forever! I was in no hurry, nor is the car a daily driver, so it was ok. I was supposed to pick it up today, but I wont be able to get to it untill next week. I will post the full dyno sheet and let you know how it drives.

[9t8z28]

That other post was also started by me. At that time, I ordered the parts and sent my car away thinking it would only be a few weeks. Six months later, I still dont have all the results or the car back. A lot of things happened to my installer / tuner that made this project take forever! I was in no hurry, nor is the car a daily driver, so it was ok. I was supposed to pick it up today, but I wont be able to get to it untill next week. I will post the full dyno sheet and let you know how it drives.

Oh sh1T!! Well, I though you gave up. Oh well. I am still glad you got it done and posted it. Just make sure you follow through this time!!!!
j/k

[txz28]

where do i get info on this kit?
<<<PC DUMB SHIT over here lol

[BADASS2000SS]

Summit Racing has the kit. Or you can check it out at Trick Flow themselves.

[stevenm357]

just one more eager listener

[BADASS2000SS]

I just bought new poly tranny and motor mounts, and QTP Stainless LT headers. I will be making an appointmet in a week or so to get it all installed and retuned. I will give you the numbers difference from Edelbrock shorties to QTP Lts. I am hoping its a big difference!

[shady milkman]

I just bought new poly tranny and motor mounts, and QTP Stainless LT headers. I will be making an appointmet in a week or so to get it all installed and retuned. I will give you the numbers difference from Edelbrock shorties to QTP Lts. I am hoping its a big difference!

huge....you are bringing in all this air and pushing it out..but then its getting bottlenecked at the shorties....look for a 30rwhp + from that.

[Killer_bluebird]

Post the Dyno sheet if possible.

[67CamaroRSSS]

Still waiting on dyno sheet results from this. Post em up when you get them.

[BADASS2000SS]

He guys, I am sorry I have no been around to answer the questions previously asked. My car is a once a month driver, if I am lucky. I am a cop in Florida which keeps me working usually 6 days a week. I dream every night about waxing up the SS and taking some photos to post on here. I just never get a chance. My numbers are right under my avatar. I promise I will try to get some pics up soon and answer any questions about the TF 515 package. I still have not got LT headers yet. Feel free to ask any questions, this same post will be copied over to my other post.

[9t8z28]

He guys, I am sorry I have no been around to answer the questions previously asked. My car is a once a month driver, if I am lucky. I am a cop in Florida which keeps me working usually 6 days a week. I dream every night about waxing up the SS and taking some photos to post on here. I just never get a chance. My numbers are right under my avatar. I promise I will try to get some pics up soon and answer any questions about the TF 515 package. I still have not got LT headers yet. Feel free to ask any questions, this same post will be copied over to my other post.

You dream of waxing it up to take pics? If I was a cop, I would dream of chasin down criminals with the Camaro!

[BADASS2000SS]

HAHAHAHAHAHAHAHHA.......My Crown Vic aint to slow!

[txz28]

aint to fast either lol

[Sarge91]

Where can u get that pakage? And is install labor price a bitch?

Edit: NVM,

http://store.summitracing.com/partde...0&autoview=sku

''shock''