New Rims...Pictures.

[Y2KPewterSS]

how are you getting so many and such big photos on here I had to shrink mine to medium to get them on here..

Post them on photobucket, then link them to here

[scotthd]

I did still had to shrink them maybe I didnt do it correctly went to manage attachements at bottom of page and linked my photobucket but files were too big had to shrink pics to medium to get them to work

[Y2KPewterSS]

I did still had to shrink them maybe I didnt do it correctly went to manage attachements at bottom of page and linked my photobucket but files were too big had to shrink pics to medium to get them to work

http://www.ls1.com/forums/showthread.php?t=73689

The link above will walk you through it. Don't use the attachment option on here, the size is limited for attachments here.

[scotthd]

thanks man!!!Ill give that a shot.

[2000silverbullet]

to vht my tails, do i not have to take them out, or yes...anybody have instructions.

[allbaugh_04]

to vht my tails, do i not have to take them out, or yes...anybody have instructions.

yea it's very easy

1. peel back the carpet inside the car and access the rear of the tails

2. there are two hand turnable knobs, pretty much, that are easy to remove

3. after that, pull out the tail and disconnect the wiring (light bulbs) from the actual tail light housing

4. you do this by turning it clock wise or counter, i can't remember, then pull outward. you'll figure it out

5. take sand paper and scuff up the tail light. i think i used 400 or maybe 600. i sanded till i got off all the lettering on the tails too, i did my sidemarkers as well, but they require a star shaped screw driver. i just went to menards and bought that and then took it back when i was done...i know i know...owell

6. the sand paper makes it so the vht nightshade sticks to the tailight and not run, i beleive

7. you don't want it to run ok, VERY BAD

8. use VERY VERY light coats and don't point it too close to keep it from running, just be safe and stay a foot or so away from the tail. make sure you have good ventilation K

9. depending on how dark you want them use 1-2 cans K

good luck

i put clear coat on mine afterwards, but this is WAAAY more work and optional

[allbaugh_04]

BTW i bought my supplies at O'Reiley's, including the VHT nightshade. They may say they don't have it.

The store i got it from was like, "what the hell is that? we don't go that." it was actually sitting on the shelf in the back.

They may have to order it K

[2000silverbullet]

thanks alot, and yeah, i havent been able to find it anywhere....i thought the tails would be a pain to pull out.

[allbaugh_04]

thanks alot, and yeah, i havent been able to find it anywhere....i thought the tails would be a pain to pull out.

it's easier than a walk in the park and now you know who has it.

its just up to you if you want to do it now