*** The TRAIN! ***

[SSwt00SS]

Good morning Brian!

how are you today? get a lot of crappy weather yesterday?

[superchargedblackgto]

Back to our discussion of bigger cubes means more power, but will cost more too. Set a budget for your build then see what fits inside that. I think you're more budget induced rather than getting the best.

lonnie says the "stroke" of any size is harder on the motor.........so that being said should I just forge the 347?.......See here in lies the delima....to stroke or not to stroke that is the question.....HAHAHAHAHA!!!!!

[SSwt00SS]

Back to our discussion of bigger cubes means more power, but will cost more too. Set a budget for your build then see what fits inside that. I think you're more budget induced rather than getting the best.

dad always said, "Cubic inches cost cubic bucks."...

[third_shift|studios]

lonnie says the "stroke" of any size is harder on the motor.........so that being said should I just forge the 347?.......See here in lies the delima....to stroke or not to stroke that is the question.....HAHAHAHAHA!!!!!

....stroke.....hard.....

[third_shift|studios]

model coming to see me today re: CD cover shoot for a band

[Spaz]

I couldn't agree more.....LOL....She looks like a skinny dude with makeup on......lol

i wonder if i can hire her for the picnic... throw lawn darts at her or something...

[ntimid8r]

Well, not so much, the lunati kit as far as build go is the most expensive, the crank alone is about 2k.......where as the eagle crank is about 800....I just want a reliably d/d.....with plenty o power...LOL

You don't need Lunati. I was going to go that route too but realized I don't need a crank capable of over 1k hp. So I got a callies compstar forged crank, it's almost the same as Eagle but has slightly better tolerances.

[Spaz]

You don't need Lunati. I was going to go that route too but realized I don't need a crank capable of over 1k hp. So I got a callies compstar forged crank, it's almost the same as Eagle but has slightly better tolerances.

i have heard that callies are the main shit stain...

[ntimid8r]

lonnie says the "stroke" of any size is harder on the motor.........so that being said should I just forge the 347?.......See here in lies the delima....to stroke or not to stroke that is the question.....HAHAHAHAHA!!!!!

For my stroker we put in melling sleeves which are among the best. Also have wiseco pistons with deep skirts to help keep the boost above the pistons.

[ntimid8r]

dad always said, "Cubic inches cost cubic bucks."...

[ntimid8r]

i have heard that callies are the main shit stain...

Their dragonslayer is the claim to fame. But that's in the same category as lunati, overkill for at least my motor and way too much.

[Spaz]

For my stroker we put in melling sleeves which are among the best. Also have wiseco pistons with deep skirts to help keep the boost above the pistons.

i'll go with a huge bore and tiny stroke and rev out to 17,000 rpm...

[superchargedblackgto]

You don't need Lunati. I was going to go that route too but realized I don't need a crank capable of over 1k hp. So I got a callies compstar forged crank, it's almost the same as Eagle but has slightly better tolerances.

I need some Input on the whole story.....PM the balance of what the parts cost and what not.......I want a price comparison.....If thats not too personal?......Hook me up Rich, and who did you buy the parts from?

[Spaz]

Their dragonslayer is the claim to fame. But that's in the same category as lunati, overkill for at least my motor and way too much.

golen(sp?) uses the DS on thier motor builds...

[Firebug]

[superchargedblackgto]

Look @ the Wankers who have come out of the wood work.......LOL....Whats up Brother?

[superchargedblackgto]

Where you been hiding @ mate?......Mary got you on a short leash?....

[Spaz]

g'day bug!!!

[Firebug]

Where you been hiding @ mate?......Mary got you on a short leash?....

g'day bug!!!

My internet is running extra slow this morning... Has taken more than 15mins to post this quoted message.

Now it's time for work...

[Spaz]

My internet is running extra slow this morning... Has taken more than 15mins to post this quoted message.

Now it's time for work...

stupid internets!!!


have a good day at work bug!!!