Fitting a 11.5" tire (also, some drag tire ??'s)

[Mr. Luos]

I run 315/35/17 Nitto DR's without problem.
I also run 275/50/15 MT radials without problem.

Would a Hoosier QTP 27x11.5x15 fit?? At least be close? A little BFH and fender rolling wouldn't be a problem if needed. But, if I can bypass that, it would be great.


Also...anyone with experience with those tires?? Sticky? Handle the shock of an M6 launching hard??


Also, since I have your attention...
26" MT ET street or 27" Hoosier QTP for a 445RWHP (uncorrected at altitude) M6 car?

[SSmaro]

I run 315/35/17 Nitto DR's without problem.
I also run 275/50/15 MT radials without problem.

Would a Hoosier QTP 27x11.5x15 fit?? At least be close? A little BFH and fender rolling wouldn't be a problem if needed. But, if I can bypass that, it would be great.


Also...anyone with experience with those tires?? Sticky? Handle the shock of an M6 launching hard??


Also, since I have your attention...
26" MT ET street or 27" Hoosier QTP for a 445RWHP (uncorrected at altitude) M6 car?

Want to sell me your 15" MT radials for test fitting on my car during the winter? I don't want to pay a lot as they will be destroyed in my attempts to fit the 9" and the diff. suspension combo's!!!!

[Mr. Luos]

Yeah, we can figure something out. Once I am finished you can have the tires.
I won't have much us for them, and they certainly won't be in very good shape.