silly cam question

[RDS]

This may have been asked and might be a silly question but does LS-1 vette and F body have the same cam? just always wondered thanks Rich

[juiced99ws6]

I cannot find good specs on the vette cam but here is some info that I have..

Corvette vs F-body LS1:
-exact same heads
-exact same block
-exact same crank/rods/pistons
-exact same intake manifold
-slightly different cam specs (negligible)
-different shaped oil pan
-different serpentine belt pulley layout

and here is the specs on the cams for the fbody/ ls6 through the years.

http://www.smokemup.com/tech/ls1.php

I hope someone else can chime in with the exact vette cam specs for ya bro.

[9T8W66]

Here you go
Y Body cam `97-99
199/207 472/479 117LSA
Y Body cam `00
198/209 500/500 115.5LSA
F Body cam `98-`00
198/209 500/500 119.5LSA
All `01 up LS1 engines Y or F Body
196/207 467/479 116LSA

[98formy]

Is that right, that 98-00 f-bods have a bigger cam than the vettes?

[9T8W66]

Is that right, that 98-00 f-bods have a bigger cam than the vettes?

Yes

[juiced99ws6]

All `01 up LS1 engines Y or F Body
196/297 467/479 116LSA

I would say this part is definatly a little off on the exhaust side.. that exhaust valve almost never closes lol

[juiced99ws6]

where did you find that info?

[9T8W66]

I would say this part is definatly a little off on the exhaust side.. that exhaust valve almost never closes lol

oops sorry about the typo
Info was from Chris Endres book Chevy LS1/LS6 Performance.