how many motor mounts on a 98 ws6

**javeryboy** · 09-19-2014, 08:14 AM

Trying to find out how many motor mounts go on a 98 trans am and wats a good brand

***SMWS6TA*** · 09-19-2014, 08:49 AM

only 2.

Are you wanting stock or poly? Poly will stiffer but you'll feel more vibrations from the motor.

**javeryboy** · 09-19-2014, 11:47 AM

thanks might try poly

***SMWS6TA*** · 09-19-2014, 12:08 PM

I got mine at summit

**024mula** · 09-19-2014, 02:23 PM

Originally Posted by javeryboy

thanks might try poly

If you go with poly, make sure you get grease fittings on them or the squeaking will drive you nuts.

**pajeff02** · 09-19-2014, 05:09 PM

Motor mounts come in a pair, which is all you need. To install the poly replacements, you have to grind or drill out the rivets on the clamshell. This will separate the two halves, after which a heat gun or propane torch will break the old rubber mount free as it is vulcanized to the shell. You then install the poly piece and bolt the clamshell back together with the supplied hardware.