Results 1 to 8 of 8
Thread: gears
-
01-23-2011, 11:27 AM #1
gears
ok i have a 00 camaro z28 with i belive 273 gears can i use my carrior and install 410 gears . also will this affect any other items traction control abs so on i understand speedo will be off no big deal.
Last edited by pewter Z28; 01-23-2011 at 12:38 PM.
-
01-23-2011, 11:44 AM #2
You could get a cheap hand programmer to correct all that. Or, if you have someone that tunes your car... All of it will be affected.
-
01-23-2011, 12:28 PM #3
i dont plan on to much mods just bolt on stuff then plan on frost tune but money is very tight now just want to plan it out so no mistakes or headaches
-
01-23-2011, 02:46 PM #4
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,822
2002 Z28 A4 NBM- Sadly now demodded :(
I assume you're an A4?
If so, then if you have 2.73 gears (base Z28 gearing - confirmed by the door tag stating GU2) just be sure to get gears for a 2 series carrier. 3.23 (code GU5, optional for Z28 A4) then you can use standard gears.
FWIW, A4 cars seem to run better with a max 3.73 gear. This is based on the contact area of the gears due to the smallish (7.5") diameter ging gear.
If you are M6 then you already have 3.42's and 4.10's would the next logical step up.67 Camaro: K-K + 797-z (look it up), 454/Th400/4.10 12-bolt = 6mpg, PS/PDB/PW tilt, tach, gauges...
2005 Corvette LS2/M6 Magnetic Red Metallic (What else would it be?) w/ Cashmere interior
2002 Z28: NBM/Tan, MTI smooth lid, smooth bellows, !AIR, !cats, 1-3/4" QTP SS LT's, 2-1/2" TD's with X-pipe, MagnaFlows dumped at axle, custom welded SFC's, MidWest Chassis body mount adjustable T/A, 3400 stall, 3.23 gears (was 2.73). Tuned: 343rwhp/357rwt (before TD's). Best: 12.559 @ 108+, 1.73 60' @ 3500' DA w/MT ET Street DR's.
Carbon footprint? CLOWN SHOE!
-
01-23-2011, 04:55 PM #5
-
01-23-2011, 05:59 PM #6
ok so 373 it is thanks guys will also be thinking about slp diablo tuner to help out as well as cat back slp 2 system what could i be looking at horsepower wise ? i have cold air tb and mass air done already .by the way yea a4 car stock other wise
-
01-23-2011, 07:33 PM #7
- Join Date
- Nov 2009
- Location
- NOVA
- Posts
- 1,266
2002 C5 - M6 - Blue- 2000 Z28 - A4 - Pewter
As far as the diablo goes... http://www.ls1.com/forums/showthread.php?t=150858
So you want a LM2? I've got the LM1 on my '99 with the SLP Y and cats, factory exhaust manifolds, and if you do any kind of highway commuting, it'll get annoying. Luckily, I've got an aftermarket stereo system in my car, so I just turn it up when the drone starts getting to me
HP? Well I hate bench racing, so to speak, but a fair guestimate, I'd put you around 310
2000 Z - Light Pewter Metallic - A4 - 130k - Bolt Ons - My Pride and Joy
2002 C5 - Electron Blue - M6 - 32k - My Dream Car
-
01-24-2011, 11:56 AM #8
My girl is going to buy me some 3.73s so she says.....lol One of Christmas presents (guitar pedal) wasnt quite what I was looking for so she said those wouldnt be a bad addition to the car.
She likes fast cars so I am in luck!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: about to change my plastic gears for brass gears
By edrvsqz1980 in forum General HelpReplies: 17Last Post: 07-18-2009, 05:09 PM -
need gears
By hamptonwsk in forum Parts Wanted / TradeReplies: 7Last Post: 07-09-2008, 09:17 PM -
4:10 Gears (New) 10 Bolt. 3.08 Gears Low Miles. 12 Bolt.
By 991lez in forum Parts For Sale / TradeReplies: 2Last Post: 04-14-2006, 01:03 PM -
Stock 2.83 gears to 3.73 gears?
By 97formula in forum Automatic TransmissionReplies: 3Last Post: 11-20-2005, 08:36 AM -
3:73 gears, 3:42 gears, clutch, flywheel, plug wires
By ls1hater in forum Parts For Sale / TradeReplies: 4Last Post: 08-16-2005, 06:15 PM
Bookmarks