Is this a good combo

[karpetcm]

I want to get 35mm Front Sway bar which i know for sure but what im a bit confused on is should i get a 24mm rear sway bar or should i just get a 21mm 1LE and also were can i find a rear 1LE sway for cheap. Ive looked on ebay but no look yet on the rear 1LE's.

[Sam Strano]

1LE's are scarce as hen's teeth these days.

I'd suggest just getting a set of my hollow bars. The front is 35mm, the rear is 22mm, *both* are hollow which saves some 20 pounds of weight if you compare them to solid bars of the same or similar size. $429 shipped, and includes all the bushings and hardware you need (even grease for the bushings). Yes, you can get cheaper stuff--hell we sell cheaper bars. But they don't fit as well, weigh a lot more, and you end up spending part of the difference in shipping. Plus if you get a used bar for the rear, have to then buy links and mount bushings in urehtane to match what comes in my kit.

24mm is just too much rear bar unless you have something going on like a slammed PHB height or Watts link height (very low roll center). I'm guessing you don't.