P1SC-1 Procharger

Used P1SC-1 Procharger Kit for 98-02 Trans Am
9 lb. pulley
Twin Intercooled

Not sure on exact miles. Last owner said it was recently installed when I bought it and I believe him because the belt was way too big and the car was not tuned for it. I have put about 8,000 miles since. Oil changed at 5,000 miles.

Often considered the cleanest blower setup. Hides the blower and intercoolers. Many people ask me where the blower is.

I am selling it to try a NA setup.

Located in Charlotte, NC until May, then Mt. Airy, MD

Kit Still on Car:
http://i197.photobucket.com/albums/a...WS6/2085_4.jpg

http://i197.photobucket.com/albums/a...WS6/2080_4.jpg

http://i197.photobucket.com/albums/a...WS6/2090_4.jpg

http://i197.photobucket.com/albums/a...WS6/2089_4.jpg

Intercoolers are located in the openings below the running lights/turn signals.
http://i197.photobucket.com/albums/a...29800_4397.jpg

Brand New Owners Manual with Instructions from Procharger:
http://i197.photobucket.com/albums/a...r/P4110002.jpg

http://i197.photobucket.com/albums/a...r/P4110003.jpg

http://i197.photobucket.com/albums/a...r/P4110004.jpg


Kit Layed out as the instruction diagram shows:

http://i197.photobucket.com/albums/a...r/P4110006.jpg

http://i197.photobucket.com/albums/a...r/P4110011.jpg

http://i197.photobucket.com/albums/a...r/P4110007.jpg

Close Ups:
Clamps:
http://i197.photobucket.com/albums/a...r/P4110012.jpg

Intercoolers:
http://i197.photobucket.com/albums/a...r/P4110018.jpg

http://i197.photobucket.com/albums/a...r/P4110017.jpg


EDIT: Pics move to next post due to 15 pic rule.

Not Pictured: 42 lb. injectors included

One clamp was scratched up so I bought a new one to include.

All the bolts that hold the SC to the bracket are brand new.

The bolts that hold the intercoolers to the car are also brand new.

The filter has a small chip out of it where it rubbed something. Still fine to use. I have a pic but would not fit into the post. PM me if you want to see it.

Crank hub pulley has a chip out of the lip due to a 3 prong puller. I do not have pictures yet because it is not off the car. If you do not want it, take $100 off the price to get a new one.

Add $50 for a brand new never used Sport Comp 30/20 Boost/Vacuum Gauge
http://autometer.com/cat_gaugedetail...id=2845&sid=15

Easy to install, you just need to get some relocation brackets to move the air pump, cruise control and horn.

Price $4,300 obo shipped, well over $6,000 new.

PRICE DROPPED to 3950+ shipping. Needs to go NOW

Head Unit:
http://i197.photobucket.com/albums/a...r/P4110022.jpg

http://i197.photobucket.com/albums/a...r/P4110023.jpg

http://i197.photobucket.com/albums/a...r/P4110024.jpg

http://i197.photobucket.com/albums/a...r/P4110025.jpg

Head Unit Bracket:
http://i197.photobucket.com/albums/a...r/P4110016.jpg

nice kit. Subscribing!

maybe if i get my tax check back in time

good deal.

free bump for a nice kit :cool2:

Snowboardr18,

What's different to install this on an 02 vette?

Where is the fan?

This is very tempting, but I'm going for the "sleeper" stock look...H/C/I...bump for a great kit and price.

Quote:

---

Originally Posted by tims02

Snowboardr18,

What's different to install this on an 02 vette?

---

I'm not quite sure, I will look into that later tonight.

Quote:

---

Originally Posted by 9t8z28

Where is the fan?

---

The fan is included, I forgot to post the pics of it before.
http://i197.photobucket.com/albums/a...r/P4220033.jpg

http://i197.photobucket.com/albums/a...r/P4220034.jpg

Quote:

---

Originally Posted by ls1camino

This is very tempting, but I'm going for the "sleeper" stock look...H/C/I...bump for a great kit and price.

---

This is one of the best sleepers you can have. You can't hear the blower at low RPM so almost everyone thinks it's almost stock. A lot of people can't find the blower when the hood is up at a show so I have to show them where it is.


PRICE DROP, THIS NEEDS TO GO IN NEXT FEW DAYS

Ill Give U $1500 Its All I Have

Quote:

---

Originally Posted by Snowboardr18

This is one of the best sleepers you can have. You can't hear the blower at low RPM so almost everyone thinks it's almost stock. A lot of people can't find the blower when the hood is up at a show so I have to show them where it is.

---

I meant, I want an all motor car...and I love having a "functional" Ram Air...once again, :bump:

Quote:

---

Originally Posted by tims02

Snowboardr18,

What's different to install this on an 02 vette?

---

not much. I know the headunit bracket for the Vette is different from the Fbody. you could buy the whole kit and sell the bracket and buy a Vette bracket.

tins02:
I got back from working on the school drag car way too late and have class in 5 hours so I don't have time to figure out exactly what is different right now. I will look into it as soon as I can.

This guy said he looked into it:

Quote:

---

Originally Posted by ND4SPD_SS

not much. I know the headunit bracket for the Vette is different from the Fbody. you could buy the whole kit and sell the bracket and buy a Vette bracket.

---

Quote:

---

Originally Posted by SSMOKEshow

Ill Give U $1500 Its All I Have

---

I'll see your $1500 and raise you $50...

Is this a auction now ? mmmmmmmm

PM sent

I found out it's more than just the bracket.

Quote:

---

Originally Posted by TA421

Is this a auction now ? mmmmmmmm

---

Maybe..maybe not...

I will go to 1575.50

The sts isn't bad, but it definitely has a lot of kinks that need to be worked out by the company...

(sorry, not trying to threadjack!)

this is a GOOD deal on this kit. it will make good power on a stock motor.

If you don't mind my asking, what kind of power numbers did you put down with this setup? I just went with my N/A setup and this at least has me considering a FI setup.

The car was completely stock other than this kit. It had a very mild tune and put down over 420 rwhp. I wanted to keep my rear and ds in one piece. Don't forget, those numbers are stock heads, intake, cam, etc.

Quote:

---

Originally Posted by Snowboardr18

The car was completely stock other than this kit. It had a very mild tune and put down over 420 rwhp. I wanted to keep my rear and ds in one piece. Don't forget, those numbers are stock heads, intake, cam, etc.

---

I'm not questioning you whatsoever about it giving your car 420 rwhp. What I was wanting to know, though, is if you could post your dyno sheet so that I can see the entire power curve. Thanks in advance!

this kit pushing 7-8lbs of boost you'll be in the neighborhood of 450-500hp at the wheel.I know because this is the kit I have and that's the outcome I'm shooting for.

Quote:

---

Originally Posted by ND4SPD_SS

this kit pushing 7-8lbs of boost you'll be in the neighborhood of 450-500hp at the wheel.I know because this is the kit I have and that's the outcome I'm shooting for.

---

With intake, heads, cam, exhaust it should be more

I will go 1600.00

Quote:

---

Originally Posted by camaromike

I will go 1600.00

---

are you serious?

I've already had plenty of offers for $3500

I'm guessing the fuel pump isn't included, right?

is it sold yet? would be so fun:typer:

Y R U SELLING ????????????????????:thinkin::thinkin::thinkin:

Quote:

---

Originally Posted by Tracker9118

Y R U SELLING ????????????????????:thinkin::thinkin::thinkin:

---

I want to start racing NA. I was planning on keeping the procharger and building the car around it but I do not want a 800-900 whp street car. I now plan on going for 500-600 whp NA.

PM sent!

can u do $3000 cash money

How complete is this kit?

What size pulley?

Does it come with the pinning kit?

Can I get a pic of the crank pulley?

Wiring harness?

Relocation brackets included?

I sent you an Email, PM and I returned your call.
Thanks
Brandon

Just so you know, I went with another kit. Thanks for the offer.

Ok, I'll bite. I'm in Asheville, NC! I could pu or how much, bottom line, and would you install it? I assume you installed on your car?


What am I thinking, someone STOP me!


Let me know.

Ok, I came to my senses....Don't tell me how much $!!! If you got offers for $3500, mine wouldn't be as good, although tempting. Bad timing....did you put this on Ls1tech.com or ebay? Someone has to buy it?! Dam that looks good though, but I'd wanna push 800+hp so I'd need motor build, tranny(and already rebuilt one this year!), rear end.....dam!

...anyone buy it yet...?

No, I had a buyer lined up, we had set a day and place to meet. When that day came, I could not get in contact witht he buyer and he has still not returned any of my messages. After that I was busy with finals and am packing up to go home today. Once I get home I will start spreading this around again. The worst part is I turned down other offers only because we had already set up a deal.

Any new offers? Try to find me a used kit that is this clean

God this is tempting...

I will be leaving for MD tomorrow morning so now anyone in NC will have to be shipped but anyone in MD can possibly meet up.

What's your final asking price? Ping me if you don't want to list here....thanks.

bump

Hi man I how are you so are you heading up to mt? I just moved down here from bozeman mt, and now I am in boiling springs Sc. anyway I have a 2000 ss, and I was just wondering if you still have the kit, and how much would it be for you to let go of it.
my number is 619 341 2827, thanks
gabe henderson

Sale pending, waiting for check to clear.

If it falls through, I will get in contact with you ghenderson3.

...and?

how much do you want for it... email me. [email protected]

SOLD and shipped!!!

Congrats. You miss NC?