Printable View
My 2000 ws6 sat for a week and driving it today seems to have a different tone and be louder. Has no cats, slp y-pipe, and elt cut-out. This morning I didn't notice it seemed the same, it seem to change while driving this afternoon had the music blasting then something changed turned the music off and that's when I felt it was diff, I could be crazy idk hahah I did close the cut-out and it was real quite all flowing out back so I don't think its a leak anyone hear or have any ideas?
I found that when the air temp is cooler the exhaust sounds louder to me then in the summer. :dunno:
Ditto. There are days when I feel my car is louder. I have even had friends/family ask if I've changed my exhaust.Quote:
Originally Posted by SMWS6TA
The baffles in your muffler may be on the way out.
you could have a bad muffler bearing…dealer charges $1,200
I would check the exhaust fluid first then spray some WD40 on the muffler bearing before bringing it to the dealer. It could also be the converter belt, it may be loose. :)Quote:
Originally Posted by godless-phoenix
what is a muffler bearing never heard of this, also what would the muffler have to do with it if the cut-out is open?
It's a joke :lol: there is no such thing as a muffler bearing.Quote:
Originally Posted by 01SsRacing
Damn Will, we could have sold him a muffler bearing. :lmao:Quote:
Originally Posted by 98TransAmWs-6
Exhaust fluid and muffler bearings... Bunch of smart asses around here. Be helpful or be quiet in the tech sections :p
Yeah but I would feel bad if we did.Quote:
Originally Posted by 2002ssslp
Still funny stuff though.
That it is.Quote:
Originally Posted by 2002ssslp
Have you been using your turn signal a lot lately? You may have run low on blinker fluid. I ran low once, and ended up having to replace my blinker clutch.
- - - Updated - - -
J/K
Seriously, though. Maybe you were driving by a wall? Mine is loud as hell all the time, but doubly so under an overpass or by a wall of any kind.
^^ I was going to suggest this. May have been the location and the sound was reflecting off something -- that could be what caught the OP's attention. Also, some cutouts do have issues staying closed and it may have cracked open a bit. :dunno:
http://kalecoauto.com/index.php?main...so90cngvehkal1
Muffler bearing. They have blinker fluid as well. Not to mention its time to change the air in the tires for winter.
I also notice most cars are louder when the air is colder. Engines make more power with colder air, so it makes sense that more power = more noise. Could also be the cutout had a bit of carbon build up on it, and did not fully close. The muffler bearing joke is a classic though!
I agree. But you may need new piston return springs. They take alot of wear over time.. And they make a clank sound as well.Quote:
Originally Posted by RONS98TA
The blinker clutch is a pain to change! I like to give it the tap test. If the tap playes well with the music you are golden! If the tap is kinda like a few beats off! Then its time to check the upper intake.Quote:
Originally Posted by az gt eater
:lmao: i created a monster! some of you guys are worse than me! I like how you guys made up ways up to actually check for these things that don't exist...blinker clutch? :rotfl:
sorry to the new guy, i thought you would catch the joke haha :cheers:
wtf?! they actually sell these things!? :lmao:Quote:
Originally Posted by smokestack
The best way to check the blinker fluid is to use a sky hook to hang your inspection light just over the left side of the fender. Make sure the canibler pin isnt sticking also. They make a rattle sound when they are sticking. If you use your magnetic extention bar, you can activate it into the open position, then check for sticking. A lil WD40 will fix it right up.
Ok, ok... let's stick to the OP's question from here on out. Go ahead though and start a thread in AAG on this and continue to discuss. Surprised the phrase "Johnson rod" hasn't come up yet.
You said "Johnson". :lmao:Quote:
Originally Posted by pajeff02
This the last warning guys....stick with OP's topic or points shall be issued.Quote:
Originally Posted by pajeff02