What did you do with your Trans Am today?

Printable View

05-19-2018, 11:01 PM
Naaman

Quote:

Originally Posted by SMWS6TA

This 97 FB going to be some work. I looked it over this morning and the car has been sitting a long while.

So far -

Carpet and rag top need replaced. Seats need a really good cleaning. Everything inside needs a good wipe down.
Needs a complete coolant flush. Was getting some black foam but it cleared out after a bit, not sure what that's from. Oil is clean and clear. Transmission fluid too. I know the t stat is dead so that's a priority.

AC needs attention too. Don't know what's going one there, will investigate it later.

No knocking, back fire, or smoke form the exhaust. Throttle response is crisp.

:chuckles:
And the wife isn't happy I'm rescuing another f body :lol:

A 97, huh? You gonna keep that optispark or stick a LQ in there? :drivin:
05-20-2018, 06:15 AM
SMWS6TA

What did you do with your Trans Am today?

It has a V6. Going to fix up for my daughter for her 16th b day. Or at least that's the plan.
05-21-2018, 01:12 AM
Naaman

Oh, right on.

There was an Air Force dude who I used to see on the freeway on my morning commute with a 97 V6 (sounded like he'd had a lot done to it). He always wanted to play, but I just never felt right about it. Most he ever got out of me was a thumbs up. It was a nice ride, to be honest.
05-21-2018, 04:23 AM
Y2KArcticSS

Window motor replaced and fix kit installed, after much anger and cussing at whoever changed the motor previously... Holes drilled everywhere, but almost all in the wrong places. Holes drilled were garbage, frayed out fiberglass all over the place. One of the nuts was cross-threaded, we had to cut it off. To top it off, they decided "who needs these bolts" and let the window motor hang, so when you engage the switch, the whole motor moves up and down along the sprocket. So my buddy and I cleaned it all up, did this install correctly, and hopefully I won't have to do anything more on that door than replace the rear window guide that was broken, I'm sure in the process of the last half-assed install...

Next, probably the alternator.
05-21-2018, 08:27 AM
Redphoenix1998

Quote:

Originally Posted by Y2KArcticSS

Window motor replaced and fix kit installed, after much anger and cussing at whoever changed the motor previously... Holes drilled everywhere, but almost all in the wrong places. Holes drilled were garbage, frayed out fiberglass all over the place. One of the nuts was cross-threaded, we had to cut it off. To top it off, they decided "who needs these bolts" and let the window motor hang, so when you engage the switch, the whole motor moves up and down along the sprocket. So my buddy and I cleaned it all up, did this install correctly, and hopefully I won't have to do anything more on that door than replace the rear window guide that was broken, I'm sure in the process of the last half-assed install...

Next, probably the alternator.

sounds like Frankenhack! Holy cow! Alternator has only a couple of wires. How bad could it be? "Famous last words"
05-21-2018, 08:29 AM
Redphoenix1998

Quote:

Originally Posted by SMWS6TA

It has a V6. Going to fix up for my daughter for her 16th b day. Or at least that's the plan.

Every plan has options...
05-21-2018, 08:46 AM
Y2KArcticSS

Quote:

Originally Posted by Redphoenix1998

sounds like Frankenhack! Holy cow! Alternator has only a couple of wires. How bad could it be? "Famous last words"

I make no assumptions about easy jobs on F-Bodies anymore. :lol:
05-21-2018, 11:40 AM
SMWS6TA

I went to the local track on Friday and was killing it. Made 10 passes and won 10 times against other street cars.

1 Coyote, 1 4.6, a 5th Gen V6 with Turbo and a S10 with SBC and some mods. The Coyote must have been sleeping at the line cause I never saw him after 60ft all 3 runs. The S10 could cut a light like no other.
05-22-2018, 12:55 AM
Naaman

Quote:

Originally Posted by SMWS6TA

I went to the local track on Friday and was killing it. Made 10 passes and won 10 times against other street cars.

1 Coyote, 1 4.6, a 5th Gen V6 with Turbo and a S10 with SBC and some mods. The Coyote must have been sleeping at the line cause I never saw him after 60ft all 3 runs. The S10 could cut a light like no other.

What... are your ETs classified information?
05-22-2018, 05:25 AM
SMWS6TA

Quote:

Originally Posted by Naaman

What... are your ETs classified information?

On street tires 8.3 in 1/8 mile. Currently saving up for slicks.
05-22-2018, 11:25 AM
Redphoenix1998

So....much.....fuel pump.....wiring....
05-22-2018, 11:33 AM
SMWS6TA

Quote:

Originally Posted by Redphoenix1998

So....much.....fuel pump.....wiring....

:chuckles:

:villagers: you must have missed my summer of troubleshooting my fuel pump wiring issues. Damn sending unit was working intermittently, At parked was fine, drove it around it would cut in and out at the most random and inconvenient of times.
05-22-2018, 11:46 AM
Redphoenix1998

Quote:

Originally Posted by SMWS6TA

:chuckles:

:villagers: you must have missed my summer of troubleshooting my fuel pump wiring issues. Damn sending unit was working intermittently, At parked was fine, drove it around it would cut in and out at the most random and inconvenient of times.

Not my first time with troubleshooting the fuel system. In the end it all came down to the crappy factory bulkhead connector. But yeah gotta run all this new wire, do some splicing, get the hobbs switch in, and well....easier said than done :lol:
05-22-2018, 11:50 AM
SMWS6TA

It's funny how they make it look so easy on those car shows isn't it.
05-23-2018, 10:53 AM
Redphoenix1998

1 Attachment(s)

How can something so pretty be a pain in the ass! I purposely didn't take a picture of the wiring harnesses I need to install and the old harness I need to uninstall :sillyme:

Attachment 26942
05-23-2018, 11:12 AM
pajeff02

Are you talking about women... or car parts? :hmm:
05-23-2018, 12:37 PM
Redphoenix1998

Quote:

Originally Posted by pajeff02

Are you talking about women... or car parts? :hmm:

:rotfl: Could apply to both couldn't it
05-24-2018, 06:14 AM
DADCRUISER

JUST got car back yesterday. engine light came on just two days after i picked it up last time. smelled fumes evap purge valve gone bad and why not i just replaced virtually on the front of car. now i guess its the rear g..damn turn. replaced valve,charcoal canister,evap vent solenoid,fuel pump assembly,delco fuel cap. after 20yrs of use i can't complain. also replace rear tires, g-force sport comp2 , shop gave me the front two for free. car runs and rides pretty damn good.
05-24-2018, 07:16 AM
pajeff02

Knock on wood, nothing has gone bad on our car since we bought it in 2008. Granted, all the suspension pieces and such were upgraded through the years, but everything else is still working.
05-24-2018, 08:23 AM
DADCRUISER

GOT my list ready for doing rear suspension. hoping to get it done this summer.