PCV/Catch Can/Crank Pressure

Hello Sarge,

I came across this thread from an internet search and I have a question. I have a 2001 Z06 that I just purchased a CCA oil catch can for:

http://www.customcorvetteaccessories...lcatchcan.html

(these catch-cans are popular on the corvette forum)

My car is currently at The Vette Doctors here on LI and they will be installing it. To be honest I got confused reading this thread and what I am wondering is if this can will work properly on my car and won't be allowing dirty air back into my TB. Any tips, advice?

Thanks,
Kevin

Quote:

---

Originally Posted by Kbreese

Hello Sarge,

I came across this thread from an internet search and I have a question. I have a 2001 Z06 that I just purchased a CCA oil catch can for:

http://www.customcorvetteaccessories...lcatchcan.html

(these catch-cans are popular on the corvette forum)

My car is currently at The Vette Doctors here on LI and they will be installing it. To be honest I got confused reading this thread and what I am wondering is if this can will work properly on my car and won't be allowing dirty air back into my TB. Any tips, advice?

Thanks,
Kevin

---

Hey Kevin...sorry for the delay in responding...I'm at my place in Grand Cayman and frankly have been focused more on the boats/beer than here :)
I'm sure you can understand....
Yes the catch can will be a upgrade over the stock PCV system you have...reducing oil in the intake also reduces detonation/retarded timing etc. So hopefully you went ahead with it....I see an unopened beer....gotta run :)

I have had folks advise me of getting a catch can because I have a performance cam. Still debating.

Big cam you should also look at a vacuum reserve can.....see the yellow lines running to mine...keeps 20lbs of vacuum for your brakes at all times....big cams rob all your vacuum...talk about instant brake pressure :)
http://img.photobucket.com/albums/v6...TOSTUFF002.jpg

yep gotta have them brakes,also can get an electric pump that makes vaccume,easier to just go the vac can route.

Quote:

---

Originally Posted by qwkgto

yep gotta have them brakes,also can get an electric pump that makes vaccume,easier to just go the vac can route.

---

Ya the vacuum can route wasn't enough for my car or my fathers. We had to got the electric motor route.

While this thread is alive again,,,,,


Anyone know who has the PCV aluminum catch cans forsale reasonable???

I checked awhile back and remember the WS6store had them for around $65

Now I see they are $100 smackers. I may have to just pass on that.

Quote:

---

Originally Posted by Firebirdjones

While this thread is alive again,,,,,


Anyone know who has the PCV aluminum catch cans forsale reasonable???

I checked awhile back and remember the WS6store had them for around $65

Now I see they are $100 smackers. I may have to just pass on that.

---

in the same boat...

Quote:

---

Originally Posted by qwkgto

yep gotta have them brakes,also can get an electric pump that makes vaccume,easier to just go the vac can route.

---

Pump is like $350. Can is like $50 :)

Quote:

---

Originally Posted by Sarge

Pump is like $350. Can is like $50 :)

---

Unfortunately our camshafts required the pump :(

Quote:

---

Originally Posted by JoshieDoom

in the same boat...

---

Well I guess that answers that. That sucks, guess I won't be getting a pair of those then. I'd rather spend $200 on other things.

you can make do with an inline water filter for air compressors. Not the optimum set up but it'll work.

Quote:

---

Originally Posted by 0rion

you can make do with an inline water filter for air compressors. Not the optimum set up but it'll work.

---

You have my interest. I'll have to dig into that deeper.

Quote:

---

Originally Posted by 0rion

you can make do with an inline water filter for air compressors. Not the optimum set up but it'll work.

---

I tried that and it looked really gay lol. Plus to purge them they required pressure. I had to take it apart to clean

I have some extra's I got. Brand new. Still in the packaging. These are the top notch. I'll post up some pics later.

Quote:

---

Originally Posted by Sarge

I have some extra's I got. Brand new. Still in the packaging. These are the top notch. I'll post up some pics later.

---

Extra what??? Home made or the billet aluminum??

Billet....very nice....polished aluminum with breather....

Hmm I've never seen one with a breather. Are you selling?

hey sarge got a can setup for me?

Sure...here they are .....
http://www.ls1.com/forums/showthread.php?t=105124