Printable View
if i get the light tower II"s, which fog light bulb will match it. i wanna get them the same color. would it be the 5500k or the 8000k. both are super white.
last question is does anyone run the 100 watt high powered fog light or does it run to hot. i dont want to melt the housing.
Did you get them from superlumination.com? Thinking about doing the same to my drlsQuote:
Originally Posted by enkryptik
yup. Today though, i got to work and they were both off. On way home, right side was on. The left side came on and was white only when i turned lights on all the way. strangeQuote:
Originally Posted by swisscheese
anyways, i def need to get something to make them blink faster but no idea what
something really strange happening. For some reason one of my switchback leds is not lighting amber at all. I've tested it on both driver and passenger sockets and it only lights white when lights on. other one works both colors in both sides.
Is it possible that an led can stop showing 1 color but not the other???
this is really pissing me off considering the amount of money I've dumped into lights, sockets, and housings!!!
I just emailed them to see what's going on. I'll post results of whatever they say.
EDIT: emailed me back that night and asked what make model and year my car was so i replied back last night. Still waiting for a reply back :(
Just to add my comments, if it helps anyone;
I changed the DRLs and all rear bulbs for LED bulbs (in my case I got from superbright in US, coloured as standard).
I'd also advise anyone to get electronic flashers for BOTH the flashers (remember the hazard flasher!).
THe fronts (well in fact all of them) are better if they are "side firing" leds that give plenty of light to the sides as well, otherwise they don't light the lenses fully.
kr D.
...still waiting for a response back. Sent the email on Tuesday...
enkryptik, first you want them to blink faster then change the flasher to an electronic flasher they will blink at least twice as fast, you'll be very happy.
Second, pull the one down that isn't changing color and wiggle it while pushing in, what you are experiencing happened to me and it was merely that it wasn't making a good connection, helps to pust some bulb grease on it too.
Remember guys, these are white with the headlights down and when the headlights are down and they are glowing white, when you switch either one of your signals that signal will turn yellow and back to white, then yellow, then back to white...but when the headlights are up, the lights are amber blinking or not.
imma go wiggle it around a bit
but the light colors for mine are
headlights down: amber and amber blink
headlights up: white and amber blink
unlock car: flash white
weird, still not working
one will only do orange, one will only do white now even if i switch them around...
edit: anyways, what flasher should i get and from where?
part number electronic flasher - fl32 available at autozone
thx. was worried that one wouldn't work well for led but it works great.Quote:
Originally Posted by 99pewterta
now i just gotta hook up my leds directly to battery to troubleshoot why one only shows white and one only shows amber even if i switch which socket it's in.
Will do it this weekend so I can conclude this whole light crap. Superlumination thinks it's something wrong in the wiring but I hooked up a standard bulb on each side and they both function 100%
Any news on this? :coffee:
all my stuff is working 100% and has since i installed the led protectors and also replaced alternator also as it died.
Ok, gonna give it a try.
On my list are:
2 switchbacks for the drl/turn in the front
2 LED protectors, one for each side
and a flasher
Just two questions:
Would the 30 LED tower switchback fit on a Camaro-housing
and is the special flasher for the hazard-lights required?
I only bought one flasher but I think a special led flasher would work best.
Think I measured and if housing is big as the trans am then should fit. I dunno how big the camaro housing is
Finally the parts arrived and I had the time to install them.
I tried first only with the switchbacks and the LED-flasher and it worked fine. Amber drls, white parklights and switching from amber to white and back with the turnsignals.
Then I installed the LED-protector in between in the ground wire like its says on the superlumination website. then I only had white color, for drl, park and turn. so i took them out again.
One thing I forgot: to order some LEDs for the sidemarkers :sillyme: I have now some white bulbs in there but they are much dimmer than the switchback. And yes, I think the 20 LED-tower is bright enough.
pics or vid?
mine is not work correctly . . what size bulb did u use? 48, 60? I'm having issues with the bulbs shutting completely off or one one being on with the headlights on. Also, I'm not gettin the switchback effect at all, either flashes amber-off or white-off. New flasher and LED protectors installed. Autolumination (aka superlumination) are now saying the switchbacks won't work for our cars, but haven't answered my emails for almost a week.Quote:
Originally Posted by enkryptik
check out my thread and my troubles:
http://www.ls1.com/forums/showthread.php?t=122438
drl front view:Quote:
Originally Posted by SMWS6TA
http://i282.photobucket.com/albums/k...8/IMG_1278.jpg
closeup:
http://i282.photobucket.com/albums/k...8/IMG_1285.jpg
parklights closeup with the switchback-LED and some Philips bulbs for the sidemarkers:
http://i282.photobucket.com/albums/k...8/IMG_1284.jpg
and a pic with the HID-kit installed:
http://i282.photobucket.com/albums/k...8/IMG_1291.jpg
The color of the led seems to match the hid color quite good while the bulb for the sidemarker is somewhat grey.