Hey guys, i have a 99 ws6 and i have 2800$ to spend on her. I want it faster, and to sound good! what should i do? p.s. i already did intake, & exhaust.:uzi:
Printable View
Hey guys, i have a 99 ws6 and i have 2800$ to spend on her. I want it faster, and to sound good! what should i do? p.s. i already did intake, & exhaust.:uzi:
Standard? Automatic?
Cam/Tune wakes these motors up......far less than what you have to spend....if your a A4 ( I cant remember if WS6 are all standard ) then a stall will wake your ass up with the above...cam and tune for sure...
+1 for cam and stall
yea cam and tune sounds good. its an auto, so stall would be good.
is it bad to do cam w/o doing heads???? If its ok whats a good cam. I want it to be noticable by performance, and sound, but not too aggresive.
depends on ehat you want. low, mid or high end torque or power. Lots of great cams out there. Also another thing to look at is do you intend to add a power added in the near future. I.E. turbo, nitrous If so look into a cam that will work well with it.
Heads are not required but will make a huge difference down the road.
Most sponcers have a great line up of cams just start looking and give them a call. They will be more then happy to chat with you about your setup and any questions.
When looking for my cam I talked to a guy at Thunder Racing for almost two hours lol...
alright i will look into that... thanks for the help!
Did you install longtube headers?Quote:
Originally Posted by ws6talian
Don't be scared make your car a real low 11 second car. . . . . . . . . . . . . . .
First buy a set of V-6 springs from the junkyard for the rear.
Second install a pair of drag radials.
Third buy a Walbro 255 fuelpump.
Fourth install a set of AR 94 plugs.
Fith install a quality wet nitrous plate. (175 hp jets)
Sixth have the car tuned.
Now you will have a mid to low 11 second car.
That still idles bone stock,get's the same milage it always had,didn't loose ANY driveabilty,and is a sleeper.
:goodluck:
LOL
IMO change the walbro to racetronix pump been reading alot of thread about walbro pump over heating
Shit I have installed over 20 in the year and haven't had 1 issue!Quote:
Originally Posted by QKSLVR
Some have issues when it comes to wiring and make bad connections by over crimping or just bad splices. Bad ground = heat
check out LS1tech few write ups on some folks having issues... one was a personal friend of mine... Head cam nitrous car in AZ 120 + degrees out side plus exhaust temps and black top road kinda funny story I laughed a bit
long tubes (700 to 900) and true dual set up (got mine custom for around 500 with header install), stall (5-800), shift kit (130) and tranny cooler (50-100). These things will make you sound good and go faster. If you shop around for deals you could possibly get all these and have them installed for close to 2800 or so. Def look into a stall and shift kit, this is one of the single most effective mods you can do to an a4. I picked up 4-5 tenths at the track with a tci street fighter.
what are the v6 springs for?
To soften the stiff ass rear up so it will weight transfer and try to hook.Quote:
Originally Posted by bertt23
The stock Z28 and WS6 springs are stiff as hell and by NO means are designed to aid in hooking up.
They are about as stiff as your 2500 stock.
actually i dont have her anymore, used to go offroading and got into some water and didnt make it out, need to change it, have the camaro and an 07 avalanche now, but it was very stiff.Quote:
Originally Posted by LS2Tuner
??Quote:
Originally Posted by QKSLVR
"Racetronix" pumps ARE made by walbro...
I didn't even think about that until I read it. . . . . . . . . . . LOL:ughlaugh:Quote:
Originally Posted by Frost
From Racetronix's web site
http://www.racetronix.com/product/RX...-F99-FPA-t.jpg
Custom Racetronix / Walbro pump
Venturi feed system - Racetronix exclusive
Red anodized billet T6 aluminum pump assembly
Racetronix to GM Teflon wiring harness
High-pressure non-kinking G.M. fuel tube
Custom 30 micron filter sock
Most of Racetronix stuff is pricey to me anyways.
$50 more because the pump says Ractronix on it and it's red. NO Thanks you can't even see it anyways.