5.3 turbo build any tips

Acquired a 5.3 90k on it its gettin turbocharged looking for any tips tricks

Check out this month's issue of GMHTP. They have a feature article on a budget 5.3 turbo build.

Gmhtp? Gm high tech

Checked didnt see it will check the newstand tommorro thank you sir

Here you go: http://blogs.gmhightechperformance.com/6781111/gm-high-tech-performance-magazine/budget-53l/

The only changes they made were a swap out to an F-body oil pan, a new timing set, car style intake for hood clearance and then after some testing on the dyno a new cam was installed. Probably want to avoid the DOD (displacement on demand) motors, although you can disable the system. They also recommended a donor engine with the 799 heads.

Acquired a lm7 5.3 l out of a 1999 silverado 1500 4x4 90 k one owner it was a sweet score

http://www.hotrod.com/techarticles/engine/hrdp_1104_594hp_53l_gen_iii_small_block_for_3252/viewall.html

I think GMHTP's went somewhere north of 850 h.p. running E85.

for turbo'ing the 5.3...

Rod bolts, valve springs (or cam AND springs), rod bolts (if cam is done and power-band dictates) and open up that top ring gap to .026-.028" to keep the ends from butting under boost heat. Doing this with methanol, an M6 and about 16-17psi will make 700rwhp and it will live there with good tuning.