Results 1 to 11 of 11
Thread: Installed My H.i.d. Kit
-
05-13-2006, 07:15 PM #1
-
06-03-2006, 12:48 AM #2
- Join Date
- May 2006
- Location
- roosendaal , netherlands
- Age
- 40
- Posts
- 189
white- 2000 transam ram air WS6
what is this set cald and how much ??? greetz barryz
-
06-04-2006, 05:47 AM #3
- Join Date
- Apr 2006
- Location
- Fayetteville, NC
- Age
- 40
- Posts
- 298
NBM- 1999 Trans Am WS6
That looks tight as hell! Im tryin to do the same for my T/A.
-
06-04-2006, 04:48 PM #4
It looks like the igniters are seperate from the ballasts, be careful, I heard the seperate igniters like to burn out. I mounted my ballasts onto the brackets right on the underside of the headlight lenses, they look like they belong there. I'm eventually gonna do my foglights, but that's another $250.00 down the drain.
-
06-05-2006, 08:20 AM #5
as far as the bulbs/ballasts burning out i have had them for over a month and have had no problems at all. not to mention i have a full year warranty and can return them if they do burn out.
i got them from ebay for about $250 w/shipping,
if anyone is interested i can get the seller name. Really cool guy and had no problems at all. i will get the sellers name and post it.
-
06-05-2006, 09:03 PM #6
post bigger pics .. that shit is too small I need a magnifying glass haha
2002 Camaro SS #1539
MTI Clear AirLid /Magnaflow catback/Polished Hotchkis Strut Tower Brace/K&N Filter/Bilstein Suspension/
http://www.cardomain.com/ride/553601
http://www.fquick.com/illcul8troffcr
-
06-06-2006, 04:54 AM #7
- Join Date
- May 2006
- Location
- roosendaal , netherlands
- Age
- 40
- Posts
- 189
white- 2000 transam ram air WS6
yeah post the name thankssss
-
06-09-2006, 01:20 AM #8
Excellent install - looks real clean. So far, I haven't seen any other LS1s in my area with this cool looking install. But apparently, more and more owners are going this route.
The company is McCulloch. I ordered the 10000k set for my low beams. A little less bright than the 6000k or even 8000k, but has that blue-purple tint to it. And still a heck of a lot better/brighter than my stock lights.
-
06-12-2006, 11:38 AM #9
-
06-16-2006, 06:13 PM #10
Very nice, hid's rock!
-
06-18-2006, 01:07 AM #11
Just got done with my fog lights upgrade. Used a set of Hella Micro DE lamps and a set of McCullogh 10,000K H3 bulbs. Had to use my Dremel to cut off a small piece on the fog lamp housings; the stock bracket (reused) would not allign the lamps correctly (was angled a little to high). So far no issues with the lamps slipping up or down (stock lamps used a screw for adjustment). The hardest part was mounting the new bulbs to the fog light housing; just used the rubber caps that came with the fog light kit and used a zip tie to keep the caps from slipping off; you cannot see the zip ties unless you know they're there, and you squint to see them.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
PHB installed
By Formula Dave in forum Suspension and HandlingReplies: 18Last Post: 01-21-2008, 09:11 AM -
just installed B&M..!?
By NIKDSC5 in forum CorvetteReplies: 6Last Post: 12-31-2007, 02:31 PM -
Need a Cam installed in MD
By INeedLS1 in forum Eastern MembersReplies: 6Last Post: 05-16-2007, 03:21 PM -
Got my cam installed
By BlackBeastLS1 in forum Internal EngineReplies: 18Last Post: 08-23-2006, 11:02 AM -
Anybody installed one of these?
By CamaroKillZ28 in forum Manual TransmissionReplies: 9Last Post: 03-15-2006, 06:11 AM
Bookmarks