Results 1 to 8 of 8
-
02-07-2008, 03:22 PM #1
- Join Date
- Apr 2007
- Location
- Riverside OH
- Posts
- 78
NBM- 98 formula
cam upgrade plus pulley what do you think
I'm an A4 with tsp stage 2.5 5.3 heads tr224/112cam portde fast 90/90. Corrected I put down 417rwhp 407 rwt. In a couple of weeks I'm puttin in a custom cam and specs are 232/236 616 606 111 and a slp pulley. Not positive if I have the lift numbers right,but its around there.What do you guys think I'll put down/gain with this cam and pulley
Just dropped off the car and the spec are 232/238.8 not 232/236Last edited by john5632; 02-13-2008 at 12:13 PM. Reason: cam specs
-
02-07-2008, 04:36 PM #2
- Join Date
- Feb 2008
- Location
- Newark, ohio
- Posts
- 78
Maple Red Metallic- 2000 Pontiac Trans Am
bout 25 more horse maybe but ull probably lose some down low
-
02-07-2008, 05:23 PM #3
- Join Date
- Apr 2007
- Location
- Riverside OH
- Posts
- 78
NBM- 98 formula
-
02-08-2008, 07:24 AM #4
- Join Date
- Feb 2008
- Location
- Newark, ohio
- Posts
- 78
Maple Red Metallic- 2000 Pontiac Trans Am
the cam degree u posted looks like it may want to be spinning real close to 7000 round 6800-6900. i dont know what year car u have but unless its 01-02 sounds like its time for new rod bolts
-
02-08-2008, 10:43 AM #5
- Join Date
- Apr 2007
- Location
- Riverside OH
- Posts
- 78
NBM- 98 formula
No it wont be quite that high(around 6500maybe 6600) as it was my request. Not only is it on a 111lsa,but it is+2 advance. My car is a 98,but I do have Katech rod bolts in. At one point I wanted to go with an Ms3-4and a bigger stall/gear,but would need to flycut. I think the cam I have will be plenty big. don't get me wrong I loved the tr224/112 for a fast DD/work car,but wanted some more top end and since it was no longer my DD I could put up with less driveability,but I'm sure it wont be a problem for my tuner.
-
02-08-2008, 12:14 PM #6
- Join Date
- Feb 2008
- Location
- Newark, ohio
- Posts
- 78
Maple Red Metallic- 2000 Pontiac Trans Am
sounds like its going to be a sweet ride what ur compression? good call on the bolts
-
02-08-2008, 12:22 PM #7
- Join Date
- Apr 2007
- Location
- Riverside OH
- Posts
- 78
NBM- 98 formula
-
02-10-2008, 08:58 AM #8
- Join Date
- Feb 2008
- Location
- Newark, ohio
- Posts
- 78
Maple Red Metallic- 2000 Pontiac Trans Am
yes they can ijust bought some and they told me its a simple swap
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Underdrive Pulley-Does It Need OD Alternator Pulley
By Eddie 70 in forum External EngineReplies: 16Last Post: 10-01-2007, 08:23 AM -
MMS Crank Pulley, Reichard Racing Pulley
By Hodgesz28 in forum Parts For Sale / TradeReplies: 0Last Post: 08-18-2006, 08:38 AM -
Max out that 6 rib ATI Procharger Pulley Setup.. 2.5" 6rib Pulley for Sale
By HUGGER ORANGE SS in forum Forced InductionReplies: 1Last Post: 01-18-2006, 12:11 PM -
Max out that 6 rib ATI Procharger Pulley Setup.. 2.5" 6rib Pulley for Sale
By HUGGER ORANGE SS in forum Parts For Sale / TradeReplies: 0Last Post: 01-16-2006, 06:37 PM -
pulley upgrade and superdampner p1sc
By Erwin02ws6 in forum Forced InductionReplies: 3Last Post: 01-09-2006, 03:19 PM
Bookmarks