Results 1 to 5 of 5
-
09-08-2007, 11:45 AM #1
Professional Products 85mm Typhoon Polished Intake/85mm TB
Up For Sale Is a New/Never Used Professional Products Power+Plus Typhoon Polished LS1 85mm Intake Manifold + 85mm Throttle Body.
SOLD!
These Intakes Have Been Dyno Tested Proven To Make 17.7 More HP Than the LS6 Intake.
The Typhoon Intake Also Incorporates a Removable Bottom Plate To Facilitate Porting Of Intake For Even More Power!
Note: An Alumnium Intake Is Especially a Wise Choice If Going Forced Induction and/or Nitrous on the LS1 - I have Seen Plastic Intakes That Have Exploded After a Nitrous Backfire - Makes a Real Mess Out of Your Engine Bay!
These Items Were Purchased For My 2nd WS6 Trans Am When I Was Planning On Installing Nitrous - But I have Decided To Leave Car Stock. I sold the NX 85mm MAF Nitrous Setup Recently Here On the Forum - Now This Has To Go Also- Get All Items Now At a Great Price!!!
Items To Be Included:
Qty. (1) #52060 Power+Plus 85mm Typhoon LS1 Intake (Polished)
Qty. (1) #69726 85mm Throttle Body w/Cable Style Linkage (Polished)
Qty. (4) Chrome Fuel Rail Brackets. (Optional Upgrade*)
Qty. (2) Sets of Fuel Rails (1) Red, (1) Blue - Use Either !
Qty. (3) Chrome S.S. TB Socket HD Cap Screws (Optional Upgrade*)
Qty. (1) Custom Polished Aluminum EGR Cover (Optional Upgrade*)
Qty. (2) Chrome Socket Hd Cap Screws for EGR Cover (Optional Upgrade*)
Qty. (1) Clear Powdercoating of Manifold (Optional Upgrade*)
*All items marked with 'Optional Upgrade' are enhancements to parts not included with original intake/TB.
INTAKE:
The intake includes the polished intake (orig. cost of $572), set of the new/upgraded design gaskets, upgraded vacuum fitting kit, upgraded fuel rail plumbing kit, (2) sets of fuel rails (red & blue), chrome plated fuel rail brackets (orig. cost of $60), custom polished aluminum EGR cover (orig. cost of $70) to replace the crappy stamped steel version they give you, chrome socket HD cap screws for EGR cover (orig. cost $7) all original hardware included with intake, instructions.
The intake had a very nice polished finish from mfg - but I know how hard it is to keep bare/polished aluminum looking nice. You end up having to hand polish to brighten up and remove oxidation constantly - very hard to do on F-body intake due to it's location. So I had the guy that does all my powdercoating powdercoat the intake with clear to protect the finish for all time. This powdercoating is very durable and can withstand even gasoline. The process to do aluminum correctly is to first do an initial cleaning/degreasing, then bake the intake in oven @ 600 deg F to out-gass any contaminants from aluminum pores, then another cleaning/degreasing, spray on clear powdercoat, then final bake/cure in oven @ 400 deg F. Powdercoating the intake alone cost $200.
THROTTLE BODY:
The throttle body includes the polished TB (orig. cost of $198), gasket, 85mm-stock size intake adapter (polished)-only used if installing their TB on factory size intake-not needed for this PP intake, chromed stainless steel TB bolts (orig. cost of $20), hardware kit, extra throttle cam - you select which cam is correct for your year of car as the factory changed them certain years.
All items will be packaged/shipped in their original packaging and include ALL original parts/hardware, optional upgrades, and instructions.
Last edited by 1QuikWS6; 09-18-2007 at 12:41 PM.
-
09-13-2007, 11:05 AM #2
Kick it on up there for Thursday
-
09-15-2007, 12:25 PM #3
Sale Pending...
-
09-15-2007, 01:15 PM #4
- Join Date
- Feb 2007
- Location
- California
- Age
- 41
- Posts
- 2,453
- iTrader
- 1 (100%)
- 2000 Trans Am
pm sent
-
09-18-2007, 12:40 PM #5
SOLD! to ls-lx
Thanx!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
For Sale: Professional Products Typhoon Intake, TB, Fuel Rail kit- NIB
By 02 WS6 TA in forum Parts For Sale / TradeReplies: 0Last Post: 12-28-2013, 01:15 PM -
For Trade: Professional Products 85mm Throttle Body
By bigboykilroy in forum Parts For Sale / TradeReplies: 0Last Post: 11-19-2009, 06:19 AM -
85mm bbk intake, do i need 85mm throttle body?
By jmatt07 in forum External EngineReplies: 3Last Post: 02-13-2009, 07:15 AM -
Professional Products Typhoon REVIEW READ!!
By TheGimp711 in forum External EngineReplies: 5Last Post: 02-03-2008, 05:05 PM -
**Professional Products 85mm intake**
By 94 Formula in forum Parts For Sale / TradeReplies: 5Last Post: 09-17-2007, 05:08 PM
Bookmarks