Page 7 of 7 FirstFirst ... 34567
Results 121 to 136 of 136
  1. #121
    Former Mopar Man 2002ssslp's Avatar
    Join Date
    Jun 2011
    Location
    Branchville, NJ
    Posts
    3,111

    Silver & Blue
    02 Camaro SS, 04 GTO

    Those 315's look great. I will be looking into those when my income tax return comes in.
    My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
    My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k

  2. #122
    Senior Member 2001camaroSS's Avatar
    Join Date
    Feb 2010
    Location
    Greenwood, IN
    Posts
    3,508

    Light Pewter Metallic
    2001 Camaro SS

    Quote Originally Posted by 2002ssslp View Post
    Those 315's look great. I will be looking into those when my income tax return comes in.
    Going to be getting new wheels?
    2012 Regal GS

    2004 Cadillac CTS-V (Sold)
    2001 Camaro SS (Sold)
    1999 Camaro Z28 (Sold)

  3. #123
    Senior Member JoshuaGrooms83's Avatar
    Join Date
    Mar 2008
    Location
    Lake Geneva, WI
    Posts
    1,539

    Red
    98 Trans Am

    think I might be doing this mod this weekend. got a set of Black ZR1 rims laying around with new rubber on them, and really would liek to see 315s on the back of the birdy. should be interesting

  4. #124
    Member Goldcuffs's Avatar
    Join Date
    Aug 2008
    Location
    Florida
    Posts
    411

    Silver
    2000 Trans Am

    I did this mod today and I'm just sharing my experience. I have a 2000 Trans Am with ZR-1 replicas. I have full UMI suspension, Kooks long tubes, Kooks true duels, lid, smooth below, all free mods. I didn't have to clearance anything. I did get side ways and heard a rub for a second so the BFH part of this mod will have to be done. I used Nitto 555's and they are by far the SHITTIEST tire I have ever used (street). I should have listened to the other people in the other threads about this tire. I have used Michellin Pilots, Riken Raptors, and Continental DWS Extremes. (All 275's) The best tires have been the Continentals. They stick to the road cold, hot, or wet.

  5. #125
    Senior Member JoshuaGrooms83's Avatar
    Join Date
    Mar 2008
    Location
    Lake Geneva, WI
    Posts
    1,539

    Red
    98 Trans Am

    yep, its a really easy mod.
    unless you have a strange offset that pushes the tire way inboard, the ZR1 C5 17x11s fit with minimal grinding.
    mine fit nicely with UMI suspention, 1.25" Vogtland lowering springs, konis, and sumitomo 315s. just some cheap tires i had laying around. Ill get some Nitto NTO5s or Toyos later.


  6. #126
    Member jonnyman's Avatar
    Join Date
    Jan 2007
    Location
    Chicopee, Ma
    Posts
    456

    candy tangerine
    1998 ws6 6spd

    have 315's on mine, didn't need to do any mods for them to fit thank God. I'm sporting the ZR1 17x11's on mine with Vredestein Ultrac Sessanta tires. did do some adjusting with the panhard bar though.
    Last edited by jonnyman; 12-29-2012 at 10:04 AM.

  7. #127
    rice,its what's fo dinner LeadFarmer's Avatar
    Join Date
    Jan 2010
    Location
    Arlington,Texas
    Age
    33
    Posts
    815

    Silver/Black
    00' z28-R.I.P 00' WS6 M6

    A little while ago i went to a tire shop to throw on my C5Z06s. While they were putting the wheels on the owner of the shop stated that the wheels were in fact 10" even though the box said they were 9.5". He said to disregard the box and that they were definitely 10" wide. Therefore I'm considering throwing on a set of Nitto 555DRs I have laying around. I only consider doing so because I've heard these tires are not as wide as other 315s. Would I be ok? I ask because my 295 kumho ecstas aren't hooking for sheeeet ever since I got the cam/intake.

    Here's a link to my wheels: Corvette Z06 Wheels

    I know this may come off as a noob question/statement, but I just want to hear some opinions before I got out and try it.

  8. #128
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    For most 315s you need at a minimum a wheel that is 11". However I have seen some that a 10.5" wheel is only required. I wouldn't put 315s on a 10" wheel. You could do 305s though.
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  9. #129
    rice,its what's fo dinner LeadFarmer's Avatar
    Join Date
    Jan 2010
    Location
    Arlington,Texas
    Age
    33
    Posts
    815

    Silver/Black
    00' z28-R.I.P 00' WS6 M6

    Quote Originally Posted by 98TransAmWs-6 View Post
    For most 315s you need at a minimum a wheel that is 11". However I have seen some that a 10.5" wheel is only required. I wouldn't put 315s on a 10" wheel. You could do 305s though.
    I hear where you're coming from, but since the NT555Rs are so much skinnier than other 315s wouldn't I in essence be running a 305? I ask because I can't find any new 305s on the market for a 17in wheel.

  10. #130
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Quote Originally Posted by LeadFarmer View Post
    Quote Originally Posted by 98TransAmWs-6 View Post
    For most 315s you need at a minimum a wheel that is 11". However I have seen some that a 10.5" wheel is only required. I wouldn't put 315s on a 10" wheel. You could do 305s though.
    I hear where you're coming from, but since the NT555Rs are so much skinnier than other 315s wouldn't I in essence be running a 305? I ask because I can't find any new 305s on the market for a 17in wheel.
    I can't really answer that question since I have never owned nittos. But on their site it says 10.5 is the minimum recommended wheel width. You could try it but I still wouldn't recommend it unless it is dimensionally the same as a normal 305 tire.

  11. #131
    Member My00Z28's Avatar
    Join Date
    Sep 2010
    Location
    Holland, MI/Lima, OH
    Age
    33
    Posts
    822

    Red
    2000 Camaro Z28 A4

    Quote Originally Posted by 98TransAmWs-6 View Post
    I can't really answer that question since I have never owned nittos. But on their site it says 10.5 is the minimum recommended wheel width. You could try it but I still wouldn't recommend it unless it is dimensionally the same as a normal 305 tire.
    that is right according to the site 10.5 is the smallest... that is what i have on mine. 315 nt555ep tires with 17x10.5 wheel! i would not go smaller....

  12. #132
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    Not to mention you want some sidewall for curb rash among other things.

  13. #133
    Junior Member quadragin's Avatar
    Join Date
    Sep 2017
    Location
    Masch
    Posts
    1
    Pictures are not showing up

  14. #134
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,759

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    If they are connected to Photobucket it's because of Photobucket is holding all images hostage because they want money to share your pics.

  15. #135
    Junior Member
    Join Date
    Oct 2017
    Location
    Ohio
    Posts
    4
    what do you mean update my account? I am new to this so not sure what I didnt do??

  16. #136
    Junior Member
    Join Date
    Oct 2017
    Location
    Ohio
    Posts
    4
    Why cant I see any pictures?

Page 7 of 7 FirstFirst ... 34567

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 01-28-2014, 04:59 PM
  2. Question: does crager make rims to fit a 02 trans am
    By carnut7202 in forum Wheels and Tires
    Replies: 4
    Last Post: 05-09-2010, 08:49 PM
  3. Question: What parts make WS6 package 02 Trans Am
    By wmacarter in forum Firebird / WS6
    Replies: 23
    Last Post: 11-14-2009, 11:39 AM
  4. how to make a trans am look like a 240sx
    By myk02k in forum Appearance Section
    Replies: 15
    Last Post: 04-25-2008, 04:38 PM
  5. Replies: 0
    Last Post: 08-16-2005, 04:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •