What did you do with your Trans Am today?

***SMWS6TA*** · 03-14-2014, 05:41 AM

yes it does, and I have a flat non ws6 hood. At least till this summer when I plan on getting a WSQ hood.

It doesn't look like it but it's no higher then the intake and slightly lower than my TSB (tower strut brace)

**Decadence75** · 03-14-2014, 07:00 AM

Originally Posted by SMWS6TA

I plan on doing a sticky once it's all done on how to do this.

Did you figure out what to do with your catch can with this setup?

***SMWS6TA*** · 03-14-2014, 07:04 AM

not yet, I'm going to wait till I get everything installed to see what options I have.

**pajeff02** · 03-14-2014, 09:03 AM

Nice -- cool setup on the mounts.

**Decadence75** · 03-14-2014, 09:28 AM

Originally Posted by SMWS6TA

not yet, I'm going to wait till I get everything installed to see what options I have.

My best guess is probably going to be the wheel well on the other side of the evap canister.

**Dzel** · 03-14-2014, 09:41 AM

Pulled her into the garage for the first time. Also snapped some pics.

**Dzel** · 03-14-2014, 09:43 AM

**RONS98TA** · 03-15-2014, 04:38 AM

Originally Posted by Dzel

Is that a pro charger with the stock dual fans? How did that fit? I just installed a procharger D1SC on my 98 TA and I had to use the single fan. Even then it was a tight fit with the blower hitting the sheet metal plate for the single fan.

**RONS98TA** · 03-15-2014, 04:44 AM

I looks like you have relocated the radiator forward some. I see the aftermarket fan in front of the blower and what looks like the stocker on the other side. Nice set up.

**Dzel** · 03-15-2014, 05:58 AM

Yes the radiator was moved up have us about 1.5 inches of clearance in between the D1 and the fan.

You really can't see it but I have the intercooler in front of those as well about 5 inches of space in between. Custom intercooler so the fog lights are still there.

**pajeff02** · 03-15-2014, 05:14 PM

Do you have the Burkhart Chassis front bumper support?

**Dzel** · 03-15-2014, 06:45 PM

Negative. I have to double check if I even still have the crash beam

**RONS98TA** · 03-17-2014, 03:30 AM

I dont have a crash bumper at all on mine. Just the large FMIC. I made up some custom brackets so I could still have my fog lights also.

**theorangeguy** · 03-17-2014, 05:06 AM

Did some detail work...got a car show im heading to this weekend. Rubbing compound, polish, wax, etc...

I think the picture with the reflection was after the rubbing compound and before the polish.

**Dzel** · 03-17-2014, 06:07 AM

Fresh and clean!

**theorangeguy** · 03-17-2014, 06:49 AM

I also hit all the plastic and rubber striping on the car with some of this stuff...worked really well. Made the plastic between the hood and windshield look brand new.

**Dzel** · 03-17-2014, 07:39 AM

Not oily is it?

**theorangeguy** · 03-17-2014, 07:42 AM

Originally Posted by Dzel

Not oily is it?

nope. it dries in like 2-3mins and just looks black instead of oily. Its not like tire shine or anything like that...not sure how long the black color will last because i've never really used it but im sure it'll wear off eventually after washing the car 5-10times.

Has anybody tried this mod yet...? Its for the AUX stereo input on a stock headunit.

Thinking about picking up the little part tonight and splicing everything in when I get home. Must...have...IPOD...in...car...

**jonnyman** · 03-17-2014, 08:02 AM

ordered new ZR1 rims to replace my old ZR1 rims. Trying to figure out what 315/35/17 to put on the rears that are streetable and still has a decent amount of grip for straight line acceleration

**98TransAmWs-6** · 03-17-2014, 12:10 PM

Look what came in today even despite the snow! Vigilante 4000 stall and my ABS delete kit (comes with a Wilwood proportioning valve) with a Hurst line lock.