Results 2,641 to 2,660 of 7102
-
10-27-2013, 12:32 PM #2641
I found a deal at a junkyard while I was traveling for work, so I jumped on it. My overall plan is to bring the bird up a decade. Double din dvd -done, Replace the worn interior, and dynamat everything, that will soundproof it like it should. Then, HUD. LEDs all around are already started. HIDs are coming soon. I like that rear view mirror upgrade, too. The one with temp/compass. Just need to find one with map lights as well. Embroidered head rests, and splash some red into the interior. I really like the shift knob with a button on the side. Good place to put the linelock switch if you ask me...
-
10-27-2013, 12:34 PM #2642
I thought that there were courtesy lights in the foot wells. Am I right? Where are they? I am pretty sure I have the LED bulbs sitting here. 4410-CW9
-
10-27-2013, 12:37 PM #2643
-
10-27-2013, 02:20 PM #2644
contemplated parting her out to get money for a 2014 vette
-
10-27-2013, 02:51 PM #2645
Looks like a pretty sick vette. I heard they stepped up the interior and seats as well.
-
10-27-2013, 02:54 PM #2646
-
10-27-2013, 03:02 PM #2647
I heard there was a year long waiting list. Looks like you would have the time to get the extra dough.
-
10-28-2013, 06:59 PM #2648
Got over half the dynamat in tonight. Should be able to finish tomorrow night and start installing my new interior. Got ahold of Grant (maybe somebody remembers him) and getting my headrests embroidered. I need to talk to him about possibly re-stitching my boots with red as well. I picked up another boot for the emergency brake handle.
-
11-02-2013, 04:21 PM #2649
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Cleaned her up...every time I think about buying new wheels I polish mine and fall in love again...
-
11-02-2013, 06:36 PM #2650
I can see why. They are pretty sweet.
-
11-02-2013, 06:38 PM #2651
Well, I got all the dyna mat in place except the doors. Those are gonna be a whole nother project. I found out that the seats I picked up are bent to shit. So, I am going to need to pull all the leather and plastic off the old and new and switch them around. Any tips? I see that you can use zip ties in place of hog rings. I am going to try that. Anything else?
-
11-03-2013, 03:04 AM #2652
hog rings and the pliers arent too expensive to buy. I'd be afraid of snapping zipties after a short while.
-
11-03-2013, 06:04 AM #2653
Where do you find them at?
-
11-03-2013, 02:45 PM #2654
Straight Nose Pliers & Hog Rings Upholstery Kit
Just what you need.
-
11-03-2013, 06:23 PM #2655
You are right. Thanks.
-
11-04-2013, 11:32 AM #2656
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
you know that awkward moment when a guy in a 350z comes FLYING up on you on the interstate like he's going to blow by you...but you drop into 3rd and he never passes you...? yea....
-
11-04-2013, 12:55 PM #2657
-
11-05-2013, 02:59 PM #2658
-
11-06-2013, 03:46 AM #2659
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Looking for pistons for my build. I think I am going to have to go custom, no one seems to make +10cc pistons for a 3.905 bore and 4.125 stroke, they do for a 4.00 stroke but not 4.125. Also researching items needed to run e85 for my 14.0:1 compression ratio goal.
That or I may just go with +3cc pistons I can find and find other ways to increase my compression.1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
11-06-2013, 05:21 AM #2660
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
Mill the heads.
Thread Information
Users Browsing this Thread
There are currently 6 users browsing this thread. (0 members and 6 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks