Results 2,061 to 2,080 of 7102
-
05-02-2013, 11:41 AM #2061
-
05-02-2013, 11:42 AM #2062
-
05-02-2013, 11:46 AM #2063
Gave up looking for seat foam. Had the worst experience at JoAnn Fabrics getting new foam. What a cluster f*ck of old women! Pulled the seat out and shoved a new piece under my but. Repaired the leaky bladder and put it back in the car. My butt no longer feels the motor under the seat and the lumbar hits the lumbar, no. Longer the middle of my back!
-
05-02-2013, 04:34 PM #2064
Im only 30 miles from the Southside of Chicago. I actually work there as well. I'm right off I65 and RT80. Very close to I94. As a matter of fact my father grew up on Sheboygan MI, spent a lot of time in Topinabe (If I spelled that correct). We still vacation there every year when time alows. If and when you do come through,I will make every effort to meet up
If anyone were to nitpic on my ride.....Since I am somewhat stock..I cant put-up....But I will shut him up . Gotta love an ass-clown who can talk it.....but doesn't have his ride there to walk it. I love constructive criticism, In fact I welcome it...but to talk down to or be condescending..I haven't the patience for people like that.
GRATZ on 2nd place Scott
-
05-02-2013, 05:31 PM #2065
Yeah they did my mom was looking at a drop top Ss in that color its nice.
-
05-02-2013, 05:33 PM #2066
-
05-03-2013, 06:11 AM #2067
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
Order my Melling Oil Pump #10296 today. Plan on using a truck oil filter with this.
Melling GM Chevy 1994 2006 LS LS1 LS2 LS3 LS6 High Volume Oil Pump 15 More OE | eBay
Looking over my parts list All I need are:
Complete gasket set (if anyone has a list please pass on to me)
ARP rod bolts, harmonic balancer, cylinder head bolts
New exhaust gaskets
Bearings for cam & crank (leaving this for shop to order to get right size, what brand should I tell them? Clevite is the only brand I know)Last edited by SMWS6TA; 05-03-2013 at 07:41 AM.
-
05-03-2013, 06:57 AM #2068
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
05-03-2013, 07:02 AM #2069
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
- Throttle Body to Intake Manifold
- Intake Manifold to Heads
- Heads to Block
- Valve Covers
- Valley Cover
- Oil Pan
- Oil Pickup
- Oil Filter Extension (thing above filter)
- Timing Cover
- Rear Cover
- Front Main
- Rear Main
- Exhaust Manifolds
I have a set of Pro Series with about about 500 miles. I had them installed in my H/C/I LS1 then threw a rod. $100 shipped.
Aftermarket?
Get ARP studs or bolts.
Clevite will be fine. Let them figure out exactly what you need.
-
05-03-2013, 08:01 AM #2070
-
05-03-2013, 09:00 AM #2071
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
I think I have a brand new timing cover gasket, front main seal, and exhaust manifold gaskets. I'll check my pile-o-parts tomorrow.
-
05-03-2013, 10:34 AM #2072
Went and picked up both side mirrors and a new radio. Someone hit my drivers mirror a few days ago and the passenger side was broke when I bought the car.
-
05-04-2013, 07:27 PM #2073
She might go into the body shop on Monday, let's hope she is treated right and all goes well
2002 Trans Am WS.6 M6
Last bolt-on LS1 in the world
-
05-04-2013, 07:33 PM #2074
-
05-06-2013, 03:29 AM #2075
-
05-06-2013, 04:00 PM #2076
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
I started disassembling my ls6 today.
-
05-06-2013, 06:33 PM #2077
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Both heads are not on, headers are bolted up and rockers are on but not adjusted yet.
-
05-07-2013, 11:21 AM #2078
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Taking mine to the parts store to scan my SES light............................................. ......................................fun times
-
05-07-2013, 04:55 PM #2079
-
05-07-2013, 05:21 PM #2080
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks