Lid?

[mbrownin]

In my opinion the F.A.S.T. intake manifold with the 90mm inlet is the best manifold you can get for our cars. Only problem is these are about 800 bucks, but you pay for the quality products. I'm sure you can buy it cheaper but this is just an example. http://www.ws6project.com/user_stor/...f416a99525a685

Also, arguably, the FAST intake is not worth the money until you have made substantial mods to the engine, (heads, cam, e.g.)

[thecorrectformula]

Oh i know but I'm just saying it opens up for more potential because of the fact that it has a larger capable CFM's compared to most others. True your not gonna use it's full potential unless you have some decent mods.

[M-Ten]

oh ok, guess i wouldnt' even need it right now then thanks a lot for the info guys!

[WEZONIT]

I got my SLP lid for $92 shipped New. I thought it gave a pretty good SOTP feeling at 5k-6K but it could be in my head

[M-Ten]

what does SOTP mean?

[WEZONIT]

Seat of the Pants

[M-Ten]

oh lol :P so SLP would be good enough for an aftermarket lid?

[Tyler_LS1]

oh lol :P so SLP would be good enough for an aftermarket lid?

Ive got the SLP Lid and it fits perfectly!

Just make sure that you loosen up the clamps on the MAF and TB then slide the lid into the slots and clip it down. make sure its tight then tighten the clamps on the MAF and TB its a good way to make sure that you get a good snug fit.

[M-Ten]

oh ok! thanks a lot