read the bottom 1st,it wouldnt let me put it all in at once
you ahve to tear the paper off and expose as much of that wire you can,i soldered 2 longer pieces on to make life easier.just be careful when stripping them,they are small and it wouldnt take much to cut them in half! once you do that,connect them 2 the factory tweerter wires,the other 2 left over will go to the crossover and that will do the rest.pretty easy really,dont be intimidated
i had to use both sets of wires on the factory speaker.had 2 seperate them into high pass and mid...i tried hooking the tweeter wires from the factory speakers to the supplied crossover on the 62.9,sounded terrible! thats when i had to start cutting....underneath the paper on the back of the 629 is where the 2 tiny tweeter wires go to the tweeter on the 629.