Page 1 of 2 12 LastLast
Results 1 to 20 of 33
  1. #1
    Member transamgirl89's Avatar
    Join Date
    Dec 2009
    Location
    Dacula, Georgia, United States
    Posts
    555

    White
    2001 RS Camaro

    Factory SS hood or not?

    How do you tell if your SS hood is stock or not? My car didn't come from the factory with it since it's a V6 and the hood is not lining up flush anymore so it makes me wonder. Are the factory hoods metal or fiberglass?

    This is the driver side of the hood that is no aligned properly.

    [IMG][/IMG]
    And passenger side is fine.

    [IMG][/IMG]

    Driver headlight

    [IMG][/IMG]

    Passenger headlight

    [IMG][/IMG]

    I don't know if aligning it would work because if I did that the corner of the hood closest to the driver side windshield would get pinched even more. What should I do? Someone please tell me if this is a factory hood or not. I can't find any marking on the hood that indicate it's factory so any help would be great.

  2. #2
    Yeah baby! Yeah! silverWS6's Avatar
    Join Date
    May 2009
    Location
    okc
    Posts
    2,567

    Silver 2002 WS.6
    Red 1989 Formula

    I doubt its a OEM hood if it's that bad off alignment. I put a Certifit Ram Air hood on my 98 and while its not too bad on the alignment the surface of the hood is bad and the body shop couldn't do too much work on it for fear or making it worse. On my 02 they put a OEM hood when I had accident and that hood aligns perfectly!

  3. #3
    Member My00Z28's Avatar
    Join Date
    Sep 2010
    Location
    Holland, MI/Lima, OH
    Age
    33
    Posts
    822

    Red
    2000 Camaro Z28 A4

    from the pictures the hood looks like its an aftermarket product do to the hard time of lining it up. im not sure on the factory ss hoods being fiberglass or not but i know the original hood that came on your car is metal. do to the fact that its not lining up its aftermarket but it could always be errors when installing.... also from the pictures it looks like your fenders or your front bumper is off but i may be wrong?

  4. #4
    Senior Member 98maro's Avatar
    Join Date
    Feb 2010
    Location
    north bay california
    Age
    35
    Posts
    2,973

    Black
    00 camaro ss M6 #6695

    It look like after market hood. Cuz the fitting Is horrible.
    I had that on my z28 and I had to buy a original ss hood. Fit perfect
    One thing has the after market hood. Is very light weight. And the original hood is do heavy.
    It might sound funny but is true.
    And when u close or open the hood it kinda twist a little.
    00 ss blk m6 " STOCK" strano springs, slp bilstein shocks, adj LCA, adj panhard bar, relocation brackets, 2 point SFCs welded,OEM zo6 rims black, magnaflow exhaust, CME exhaust,E/cutout, slp grille, custom front plate mount, HIDs, whistler mod, side moldings delete, slp air lid, ported and polished TB, strut tower brace, 3.73s gears, and some other parts to list!
    next to come,4.10s,ls7 clutch, ms3 or 228r cam, ported 243s, ls6 intake, ls6 oil pump. ls2 timing chain, longtube headers no cats, with a tune..
    02 tahoe Z71 blacked out
    00 jeep grand Cherokee limited on 22s.
    07 Dodge Charger R/T Inferno Red, Sold
    98 z28 red m6 sold
    07 zx6r ninja flat/black sold
    08 zx6r ninja sold

  5. #5
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    6,565

    Velocity Yellow
    2008 Corvette Z06

    That is an aftermarket hood. OEM SS hoods are metal, and fit perfectly!

    2018 Tahoe - Silver - OEM

    2008 Z06 - Velocity Yellow - BBE exhuast - Airaid CAI **sold**

    2002 Z06 - Electron Blue Metallic - D1 - E85 - 701 rwhp 687 rwtq **sold**

    2002 Z28: M6 NBM - cam and boltons - 396rwhp 357 rwtq **sold**

  6. #6
    ʢ ൧ ൨ ൩ ൪ ൫ ൬ ൭ ൮Ր Ց Ւ Փ Smittro's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh
    Posts
    9,963

    White
    2008 Hummer H3

    Quote Originally Posted by konigandy6 View Post
    That is an aftermarket hood. OEM SS hoods are metal, and fit perfectly!
    This...

    I would'nt run an after market hood if someone payed me.. Especially after it taking me days to get my car into a ~3mm fit and finish.. My car is super strait better than factory, I could'nt bring myself to buy one of those goofy looking hoods just for a fake cowl induction look.. One corner up one down, 0mm here 20mm there.. Imho if you want to take a nice f-body and make it look like garbage put an after market hood on it... Sorry if that stings anyone, but it's the truth.. I have'nt seen an after market hood worth a spit..
    Last edited by Smittro; 09-14-2010 at 06:33 AM.
    :\Users\Steven\Pictures\d6ftg5nh.gif


    Suggestion: If you are particularly irritated by another member's posting habits and are constantly fighting the urge to flame them, you can click on that person's profile, and select "Add to ignore list." This will make that person's posts invisible to you.

  7. #7
    ʢ ൧ ൨ ൩ ൪ ൫ ൬ ൭ ൮Ր Ց Ւ Փ Smittro's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh
    Posts
    9,963

    White
    2008 Hummer H3

    This is what a perfectly strait f-body looks like..







    Last edited by Smittro; 09-14-2010 at 06:46 AM.

  8. #8
    Senior Member Y2KArcticSS's Avatar
    Join Date
    Mar 2007
    Location
    Henryetta/Tulsa Oklahoma
    Age
    39
    Posts
    3,675

    2016 Camaro SS - Summit
    2001 Trans Am WS6 - NBM

    Quote Originally Posted by konigandy6 View Post
    That is an aftermarket hood. OEM SS hoods are metal, and fit perfectly!
    I don't know about you Andy, but my OEM SS hood is fiberglass last I checked...I know because you can see it through some of my paint chips on the front

  9. #9
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    6,565

    Velocity Yellow
    2008 Corvette Z06

    Quote Originally Posted by Y2KArcticSS View Post
    I don't know about you Andy, but my OEM SS hood is fiberglass last I checked...I know because you can see it through some of my paint chips on the front
    Well I could be wrong, I always assumed they were metal with a fiberglass underneath. Who the hell am I to talk with my lil ole Z sittin in the driveway.

  10. #10
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Quote Originally Posted by konigandy6 View Post
    That is an aftermarket hood. OEM SS hoods are metal, and fit perfectly!
    OEM hoods are fiberglass,,,not metal.

    In fact, the OEM SS hoods will have a part number that is either stamped or molded (can't quite tell) into the underside of the hood near passenger side rear at about the 7 o'clock position. Both of my SS's have a (GM or SLP) part number in that location.

  11. #11
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    6,565

    Velocity Yellow
    2008 Corvette Z06

    Quote Originally Posted by Firebirdjones View Post
    OEM hoods are fiberglass,,,not metal.

    In fact, the OEM SS hoods will have a part number that is either stamped or molded (can't quite tell) into the underside of the hood near passenger side rear at about the 7 o'clock position. Both of my SS's have a (GM or SLP) part number in that location.
    Thank you sir. Like I stated, I always assumed they were metal. Learn something new everyday.

  12. #12
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Quote Originally Posted by konigandy6 View Post
    Thank you sir. Like I stated, I always assumed they were metal. Learn something new everyday.
    You must have posted that while I was typing, don't mean to sound like I'm giving ya a hard time.

    I'll see if I can snap a pic of the part number.

  13. #13
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    6,565

    Velocity Yellow
    2008 Corvette Z06

    Quote Originally Posted by Firebirdjones View Post
    You must have posted that while I was typing, don't mean to sound like I'm giving ya a hard time.

    I'll see if I can snap a pic of the part number.
    You're itchin to give me a hard time aren't ya!!! It's all good, I really thought they were metal. I have a Z so I don't get the pleasure of looking at one every day But I'm happy to know now.

  14. #14
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Well some people here like to think that of me anyway

    No go on the picture, I had to zoom in real close just to pick it up, and it turns out too fuzzy to see. Doesn't help that the car is dark blue anyway making it harder to see.

    My wifes SS is silver and it's plain as day visible, but she drove it to work.

    If the original poster has a legit SS OEM hood you'll see the patent number towards the bottom of the hood and next to it says "Made in Canada"

  15. #15
    ʢ ൧ ൨ ൩ ൪ ൫ ൬ ൭ ൮Ր Ց Ւ Փ Smittro's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh
    Posts
    9,963

    White
    2008 Hummer H3

    Wink

    Quote Originally Posted by Firebirdjones View Post
    Well some people here like to think that of me anyway

    No go on the picture, I had to zoom in real close just to pick it up, and it turns out too fuzzy to see. Doesn't help that the car is dark blue anyway making it harder to see.
    My wifes SS is silver and it's plain as day visible, but she drove it to work.

    If the original poster has a legit SS OEM hood you'll see the patent number towards the bottom of the hood and next to it says "Made in Canada"
    Time for glasses pops..

  16. #16
    Member transamgirl89's Avatar
    Join Date
    Dec 2009
    Location
    Dacula, Georgia, United States
    Posts
    555

    White
    2001 RS Camaro

    Quote Originally Posted by My00Z28 View Post
    from the pictures the hood looks like its an aftermarket product do to the hard time of lining it up. im not sure on the factory ss hoods being fiberglass or not but i know the original hood that came on your car is metal. do to the fact that its not lining up its aftermarket but it could always be errors when installing.... also from the pictures it looks like your fenders or your front bumper is off but i may be wrong?
    Well I did have the driver side panel aligned since my lovely tire place popped it out cause they don't know where to place the jack. It only recently started doing this so I'm not sure. The guy I bought it from says it's a OEM hood so idk.

  17. #17
    Member 02fbody35th's Avatar
    Join Date
    Feb 2008
    Location
    scranton,pa
    Age
    38
    Posts
    279

    red
    2002 camaro 35th anv.

    the factory hoods are actually not even fiberglass they are sheet molded compound A.K.A. SMC and if you look on the underside you will see stamped in it "made in canada" and I think it says "SMC" too

  18. #18
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    Quote Originally Posted by 02fbody35th View Post
    the factory hoods are actually not even fiberglass they are sheet molded compound A.K.A. SMC and if you look on the underside you will see stamped in it "made in canada" and I think it says "SMC" too
    Ya ya smarty pants, we know

    For us old farts, it's just plastic

  19. #19
    dbl clutch'n like i shld WICKEDLS1's Avatar
    Join Date
    Aug 2010
    Location
    Oklahoma City, Oklahoma
    Posts
    1,807

    sebring silver
    Y2K SS CAMARO

    Looks,sounds, and feels like fiberglass to me

  20. #20
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    6,565

    Velocity Yellow
    2008 Corvette Z06

    Well then, I can see where me and my metal Z hood are not wanted.... I'm outta here!!!



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. factory WS6 hood
    By muscatine73 in forum Firebird / WS6
    Replies: 6
    Last Post: 01-01-2009, 04:42 PM
  2. Factory ws6 ram air hood HELP
    By jmitchell in forum Appearance Section
    Replies: 6
    Last Post: 03-18-2008, 05:50 PM
  3. Needed Factory Hood
    By MapleredT/a in forum Firebird / WS6
    Replies: 2
    Last Post: 03-31-2006, 12:07 PM
  4. Needed factory hood not ram air
    By MapleredT/a in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 03-23-2006, 05:27 AM
  5. Factory Hood needed
    By MapleredT/a in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 03-23-2006, 03:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •