Results 1 to 7 of 7
Thread: ford 9"
-
02-02-2006, 02:00 PM #1
- Join Date
- Oct 2005
- Location
- baltimore md
- Age
- 38
- Posts
- 39
black- 99 ws6
ford 9"
hey guys im getting a new rear soon and i was wondering where i can get a for 9" rear that will bolt up in my 99 ws6 6spd, like the web site, also will it use my breaks and driveshaft? if not what are other good rears you recoment? i was looking at strange 12 bolts also any help would be great thanx
-
02-06-2006, 12:13 PM #2
I actually saw one on EBAY they have 3 for sale for a price of 1,800.00. It looks like a damn good deal let me see if I can find the link. Ok well I tried to post the URL and this site won't let me do it because I don't have 10 post or more yet "gay" anyways, go to EBAY and type in that # below
# 8034984748
hope that helps, I'm going to do some more research on them and I might pick one up to, looks like a bad ass deal.....
Kevin
-
02-13-2006, 02:18 PM #3
You can pull a 9 inch out of about anything ford made with a V8 in it before about 1983, if you want to go that route. I'm going to build a 9" here shortly that way. You can get a complete rear-end from a pull-a-part for less that $100 and piece it together from there...
-
02-13-2006, 11:13 PM #4
- Join Date
- Aug 2005
- Location
- South NJ
- Age
- 41
- Posts
- 51
silver metallic- 1998 Pontiac Trans AM
a friend of mine has a 9inch with 4.11gears and a good drag suspension setup in his 3rd gen camaro, im picking it up this friday, the whole car, minus the motor for 400 bucks. I want to retain my ABS and TCS so i gave moser engineering a call, and am getting what i need. new axles, with exciter rings for tcs/abs, bearings,seals, etc and new studs,... 590.00 & housing ends so my brakes work- 80.00 i also needed a torque arm mount on it. autoweld chassis has that for me 150.00 AND it makes your existing torque arm adjustable. not bad for a budget rear....
car with rear-- 400
moser engineering 670
autoweldchassis +150
total-- 1220 dollars + fluid and gaskets, so lets say $1300.00 not too bad hmm?
-
02-26-2006, 03:42 AM #5
I can get you a Moser 9" housing with axles and bearings, including the F body torque arm mount, for $900.00 shipped. All you would need then would be a center section. Bob 260 244-4808
Check out our huge website at http://www.exoticperformanceplus.com
Your Midwest Moser Specialist - We price match!
Your Midwest ATI ProCharger Specialist - We only sell the best supercharger, the ATI ProCharger! We price match! 260 244-4808
-
02-26-2006, 06:47 AM #6
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Originally Posted by Exotic Performance Plus
Now quit spamming you old fart and get us Goat guys a 9" Ford rear end....I got my Platinum CitiBank at the ready
-
03-07-2006, 08:31 AM #7
- Join Date
- Nov 2005
- Posts
- 3
Well you can go the 9 inch housing then strange makes a center section that has the 12 inch gears in it to bolt into a 9 inch
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ford 9"
By mark21742 in forum GTOReplies: 9Last Post: 12-21-2011, 02:20 AM -
Camaro ZL1 Chief Engineer says "You're Welcome" to Ford Must
By Ed Blown Vert in forum General Help - 5th GenReplies: 0Last Post: 11-18-2011, 11:40 AM -
Question: Ford 9"
By 97txaggie in forum DrivetrainReplies: 8Last Post: 11-07-2010, 05:37 PM -
Detailed 1999 Ford Taurus AKA "The Princess"
By third_shift|studios in forum Showcar and DetailingReplies: 11Last Post: 10-22-2009, 07:32 AM -
Ford 9" Swap
By jimbo98z in forum DrivetrainReplies: 0Last Post: 02-13-2006, 02:26 PM
Bookmarks