Results 1 to 5 of 5
Thread: To shim or not to shim
-
05-11-2018, 05:39 PM #1
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
To shim or not to shim
I have heard so much about shimming clutch parts like the throwout bearing. What is the deal and how do you know if you need shims? One site I saw shows how to dismantle the throwout bearing and adding a shim.
2002 ws6 T/A
-
05-11-2018, 07:08 PM #2
- Join Date
- Feb 2006
- Location
- Orange County, NY
- Age
- 48
- Posts
- 2,693
always dirty- 2013 Ram 2014 Caddy ATS
Was the flywheel cut at all?
-
05-12-2018, 07:31 AM #3
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
Shims
No, neither are the ones in the articles i have seen.
-
05-13-2018, 03:02 AM #4
- Join Date
- Feb 2006
- Location
- Orange County, NY
- Age
- 48
- Posts
- 2,693
always dirty- 2013 Ram 2014 Caddy ATS
Usually with new parts people don't do it. If you are unsure then you are going to have to install the clutch and take measurements with a dial caliper.
-
05-14-2018, 06:11 AM #5
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I have yet to use a shim and I'm using a Monster stg 4 clutch & flywheel with a GM slave.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
clutch shim ?
By sgt0704 in forum Manual TransmissionReplies: 2Last Post: 04-14-2012, 01:27 PM -
ls7 clutch shim
By Poppn in forum DrivetrainReplies: 6Last Post: 04-27-2009, 11:30 AM -
slave shim from speed inc?
By huggerls1 in forum DrivetrainReplies: 1Last Post: 03-18-2008, 03:22 PM -
Anyone have a Clutch Shim?
By JD_Z28 in forum Western MembersReplies: 10Last Post: 04-06-2007, 06:59 AM -
slave shim?
By 1999z in forum Manual TransmissionReplies: 0Last Post: 09-05-2006, 12:08 AM
Bookmarks