Results 1 to 3 of 3
Thread: Valvetrain
-
12-17-2007, 11:20 AM #1
Valvetrain
Hey all. I recently bought an 01' TA WS6 and it has a bit of rocker knock. Anyway, I wanted to replace them and was wondering what the best parts are that don't require any machining. Just wanted good stock replacements and hopefully pick up a couple horsepower. These are the parts I have picked out so far.
http://store.summitracing.com/partde...part=CSP-SLS17
http://store.summitracing.com/partde...t=TFS-21407400
Now I don't have any idea what kind of springs I should get. Could you recommend some? And also if I'm missing anything else I would need... Thanks in advance.
-
12-18-2007, 05:47 PM #2
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 54
- Posts
- 6,932
black- 2000 nhra edition formula
truthfully, you better off getting stock rocker arms. i had 1.85 rockers arms on at one time and got rid of them when i cammed my car.
with 1.85 rockers i picked up only 9 hp.
get ls6 springs.2000 nhra edition formula
a few bolt ons, 379 rwhp
11.96 @113.25
-
12-19-2007, 04:53 AM #3
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
pushrods and valvetrain
By vortex1369 in forum Internal EngineReplies: 7Last Post: 04-01-2012, 02:29 PM -
Ls6 cam n valvetrain
By 69PONTIAC in forum Parts Wanted / TradeReplies: 0Last Post: 04-04-2010, 12:24 AM -
Help: valvetrain help?!?
By WSICK in forum Internal EngineReplies: 21Last Post: 09-04-2008, 06:41 PM -
It's Not the Valvetrain... What Else?
By Sizzlenut in forum Internal EngineReplies: 11Last Post: 02-04-2008, 08:26 AM -
C5 Valvetrain
By apss in forum Parts For Sale / TradeReplies: 0Last Post: 01-10-2007, 10:30 AM
Bookmarks