Results 1 to 7 of 7
Thread: driveshaft
-
12-16-2008, 07:51 AM #1
driveshaft
ok i learned my lesson having someone else work on my car.i had a friend change my u-joint in the car well he put the cheap greaseable ones in there and they broke now iam doing it myself well i get the lakewood u-joints and when i start the project i find one of my (i guess its called ears)that the u-joint goes intoon the transmission yoke is bent just a hair where the clip wont go on.so wat do i do.am i goin to have to buy a new driveshaft.if so wheres the cheapest place kinda broke rite now and need to get the car back on the road,soon as possible.thanks.
-
12-16-2008, 11:25 PM #2
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
Buy a stocker on here or ls1tech for CHEAP...
i put greasable ones in mine too
going to upgrade to 3.5 pst shaft..
-
12-17-2008, 02:37 AM #3
If its tweeked a little you you can try giving it a squeeze with a c-clamp or vise, aslong as you are careful with it.
-
12-28-2008, 10:06 AM #4
Well one of the little ears broke on the yoke so now i need a new driveshaft so wheres the cheapest place to get a good one? our does anyone have one laying around i can buy from u?thanks for any help
-
12-29-2008, 12:03 AM #5
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
Try ls1tech?
-
12-30-2008, 12:32 PM #6
Check out your local junkyards, and i just saw a few on ebay..
J2001 SS, Its not the car its the Driver that matters....
-
01-02-2009, 05:47 PM #7
did it break on the propeller shaft or slip yoke? driveshafts from the factory arent cheap so look around on the forums
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: driveshaft
By trailblazer ssss in forum Parts Wanted / TradeReplies: 3Last Post: 01-13-2009, 08:59 AM -
LS1 Driveshaft
By Badman in forum Parts Wanted / TradeReplies: 6Last Post: 11-30-2008, 11:32 AM -
will m6 driveshaft fit in a4?
By Frankthetank in forum Almost Anything GoesReplies: 21Last Post: 08-12-2008, 04:40 AM -
Driveshaft
By thearborbarber in forum DrivetrainReplies: 2Last Post: 06-22-2008, 01:38 AM -
Driveshaft!
By RYDER661 in forum DrivetrainReplies: 1Last Post: 05-30-2006, 07:19 AM
Bookmarks