Results 1 to 13 of 13
Thread: I think i got the wrong 4.10's
-
01-20-2009, 05:10 PM #1
I think i got the wrong 4.10's
welll last time i ordered 4.10's it was for a 2 series carrier and the ring was too thick. I dont know and im not exact on this but the ring gear again looks to be too thick for a 3 series carrier. I have a 01 Z28 6 speed with ofcourse a 3 series carrier, what do you guys think i took a couple of quick pics.
-
01-20-2009, 05:55 PM #2
depends on how beast your hand is
-
01-20-2009, 06:43 PM #3
Looks fine to me.
Heres mine.
Last edited by 9t8z28; 01-20-2009 at 06:46 PM.
-
01-20-2009, 08:42 PM #4
So the one i have is definitly for a 6speed 3 series carrier car? if so then im good.
-
01-21-2009, 05:01 AM #5
-
01-21-2009, 06:18 AM #6
- Join Date
- Jun 2007
- Location
- Baltimore, MD.
- Posts
- 728
Bright Red- 2000 Pontiac Trans Am WS6
Just an FYI, but whether gears are for a 2 or 3 series carrier, they will still physically bolt to the carrier...bolt patterns are the same.
I have a set of 410's from a 2 series carrier to compare.
The pics above "appear" to show the same thickness ring gear, but it's only 1/4" or so difference in the two.
If you can get an "ACCURATE" measurement of ring gear thickness, with a caliper or micrometer, I can measure mine and we'll know if they are the same or not.
ANY 410's are going to physically be thicker than the stock 342's.
.2002 Silverado Z71 ECSB HPTuners tuned by yours truly
2000 Pontiac Trans Am WS6 6.0, 4L80E, 9" rear
webpage: http://www.fquick.com/rel3rd/
-
01-21-2009, 11:49 AM #7
- Join Date
- Jun 2008
- Location
- Euclid,ohio
- Posts
- 197
Black- 1998 Z28
Ratio is not relative,reference dimension indicates series.
-
01-21-2009, 01:54 PM #8
-
01-21-2009, 05:25 PM #9
I think its for a 3 series carrier then, last time i took this in to Hoopers Rear Ends in Sun Valley which was from a different seller but the ring had the same thickness and they kept telling me its for a auto a4 tranny car and they cant do anything to install it, i know you can install 4.10 gears in a 2 series carrier diff because my 93 Z 6speed came equiped 2.73 gears from factory and i was able to go to 4.10's. Im going to take this ring and pinion to them and get there opinion again, but does anyone know of another shop in Los angeles area that does rear ends
-
01-23-2009, 07:06 AM #10
Anyone out there, i dont know if its my luck if or no one knows but everytime ive asked this question, no answers. What rear end shops do you guys go to here locally, meaning los angeles area i live in Glendale area and i mean california. I wanna get these gears installed and see what it will do for this car, i cant wait should be fun. The help would be appreciated, thanks in advance.
-
01-24-2009, 12:30 PM #11
Anyone out there know of any shops, with as many people doing rear end changes i though there would be a good amount. If anyone knows please let me know of a shop thats in the los angeles area that does ring and pinion installs.
-
01-29-2009, 05:29 PM #12
no one knows of any good shops around my area ?
-
06-29-2012, 04:25 PM #13
- Join Date
- Jun 2012
- Location
- Rockland
- Posts
- 1
Did you figure out the problem cuz i am going threw the same thing
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wrong Place Wrong Time
By Fearls1 in forum Firebird / WS6Replies: 42Last Post: 05-07-2010, 06:26 AM -
Would it be wrong?
By Smkn_TA in forum Almost Anything GoesReplies: 25Last Post: 04-14-2009, 06:57 PM -
Something wrong!!
By dcarver07 in forum General HelpReplies: 9Last Post: 03-28-2009, 02:28 PM -
Help: I think something's still wrong
By bsteff in forum General HelpReplies: 13Last Post: 03-17-2009, 06:03 PM -
Is it wrong that I
By FantaZGuy28 in forum Almost Anything GoesReplies: 66Last Post: 12-08-2007, 11:15 AM
Bookmarks