Results 1 to 20 of 29
Thread: Clear Corners
-
02-23-2011, 02:09 PM #1
Clear Corners
I'm trying to install my set of Clear corners Into my 2001 SS, so i can finished out my murdered out look. Who all has done this?
I really have no idea what i'm doing and looking for the best way to get it done, any help would be great.
by the way +1 to AfterThoughts Auto for super fast shipping
-
02-23-2011, 02:27 PM #2
- Join Date
- Sep 2006
- Location
- Canby, Oregon
- Age
- 36
- Posts
- 2,121
Pewter- 1999 Camaro SS-M6 #1775
pulling the headlights out makes it very easy to install, the back ones are just held in with a screw
1999 Camaro SS/ Pewter/ #1775 - LS1 6-speed - Predator 3 Custom Tune - Pro 5.0 - LS7 Clutch - 3.90's - Koni's - Strano Springs and Sway Bars - SFC's - Full UMI Chassis and Suspension - LS6 Intake PnP TB - ARH LT's and Kitty Ran Away - Magnaflow.
12.6 at 112
http://www.fquick.com/Tyler_LS1
-
02-23-2011, 02:34 PM #3
-
02-23-2011, 02:43 PM #4
-
02-23-2011, 02:53 PM #5
- Join Date
- Sep 2006
- Location
- Canby, Oregon
- Age
- 36
- Posts
- 2,121
Pewter- 1999 Camaro SS-M6 #1775
^^^ that works great too, I redid my headlights so i just did it while they were out
-
02-23-2011, 04:08 PM #6
-
02-23-2011, 04:52 PM #7
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
Just remove the head lights bro. Is way easier.
It took me 1 hour to figure it out. And 10 min to get it done,
Post pix when you are done00 ss blk m6 " STOCK" strano springs, slp bilstein shocks, adj LCA, adj panhard bar, relocation brackets, 2 point SFCs welded,OEM zo6 rims black, magnaflow exhaust, CME exhaust,E/cutout, slp grille, custom front plate mount, HIDs, whistler mod, side moldings delete, slp air lid, ported and polished TB, strut tower brace, 3.73s gears, and some other parts to list!
next to come,4.10s,ls7 clutch, ms3 or 228r cam, ported 243s, ls6 intake, ls6 oil pump. ls2 timing chain, longtube headers no cats, with a tune..
02 tahoe Z71 blacked out
00 jeep grand Cherokee limited on 22s.
07 Dodge Charger R/T Inferno Red, Sold
98 z28 red m6 sold
07 zx6r ninja flat/black sold
08 zx6r ninja sold
-
02-23-2011, 06:19 PM #8
You guys make it sound easy......... We spent like 2 hours doing it. we didn't remove the headlights just came in through the bottom. It was a pain getting those things out and in. Then i got it in and one of my bulbs had went out
98Maro, I've redone my entire look over the past two weeks so I'll make a new thread tomorrow or friday with some photoshoot photos. She's murdered
-
02-23-2011, 06:26 PM #9
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
i was gonna remove the bumper.. from the bottom to me was almost impossible to do..
took me a while to figure it out and a while to remove the headlight lol
but once removed got it done quick
then the other headlight took me bout 15 min to get it done..
one thing you should do, put silicone around the corner light and a little bit on the socket againts the corner light,
other wise water will go in there,
i would love to see that thread bro, ill be doin the same to mine, and ill make a thread soon.
before/during/after,
-
02-24-2011, 02:12 PM #10
-
02-24-2011, 02:34 PM #11
-
02-24-2011, 03:52 PM #12
-
02-24-2011, 04:08 PM #13
the cheap chinese ones on ebay burnt thru and made me waste a lot of $$$ on bulbs.. i ended up throwing them out and putting in the stockers..
what the problem was, was the back of the housing itself was too close in proximity to the bulb.. it literally melted a hole thru the housing and the plastic latched onto the bulb.. Do to the immense heat and heat cycles, bulbs would constantly blow.
be careful you dont end up in the same boat as me.. wish i never bought them
they looked GREAT but worked like complete crap
-
02-24-2011, 07:58 PM #14
-
02-25-2011, 07:49 AM #15
-
02-25-2011, 08:36 AM #16
Well you got it done, so it doesn't matter, post some pics.
-
02-25-2011, 08:40 AM #17
-
02-25-2011, 04:57 PM #18
-
02-25-2011, 10:54 PM #19
-
02-26-2011, 02:22 AM #20
- Join Date
- Nov 2009
- Location
- Jacksonville FL
- Age
- 41
- Posts
- 855
TRIPLE BLACK- 2000 CAMARO SS M6 #2100
Looks good bro... imo maybe you should have gone with the corners and headlights w/ black housings to carry the theme throughout, that’s what I did except I have a black/silver theme not just black. Got pics in my album if you wanna check it out. Just my $.02. Either way it looks really good bro.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Blacked out corners or clear corners
By Z28boy2000 in forum Appearance SectionReplies: 74Last Post: 04-27-2010, 04:06 PM -
clear corners
By jrocs00z28 in forum CorvetteReplies: 4Last Post: 10-10-2008, 06:17 AM -
Wanted: Clear Corners
By 4MULAV8 in forum Parts Wanted / TradeReplies: 2Last Post: 06-07-2008, 03:31 AM -
Clear Corners?
By MarkuzLS1 in forum Firebird / WS6Replies: 32Last Post: 07-18-2007, 12:52 PM -
Want To Clear My Corners
By Sawacs in forum Camaro / SSReplies: 1Last Post: 02-19-2006, 03:44 PM
Bookmarks