Results 1 to 3 of 3
-
06-07-2007, 02:20 PM #1
10" elec. buffer or hand wax/polish??
ive only used the orbital on my winter car but heard if not done right i can mess up my paint.
plus do i polish before i wax
-
06-08-2007, 12:44 PM #2
I would think you would have to stay in one spot for a very very long time to mess up the paint with an orbital, now with the high speed you can easily burn through the clear coat if you dont know what your doing. I'd use polish before you wax, it will take off the previous coat of wax and some other contaniments before you seal it with a wax. Also reccomend useing a clay bar after the polish. You dont need to polish everytime you wax though as long as you keep a good coat of wax on it. Just my opinion...
-
06-09-2007, 03:19 PM #3
Claying is the first step.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What does it mean by "cash in hand"
By rajiv1998 in forum Almost Anything GoesReplies: 30Last Post: 06-09-2010, 01:02 PM -
Your thoughts on "RACE GLAZE Polish/Sealant"?
By 99'CajunFirehawk157 in forum Showcar and DetailingReplies: 1Last Post: 01-13-2008, 10:28 PM -
Saying "hey"! Waving a hand to all LS1er's!
By midi_2001 in forum New Member IntroductionsReplies: 4Last Post: 10-20-2007, 07:06 PM -
Hand wax or buffer ?
By Speedy_Gonzales in forum Showcar and DetailingReplies: 24Last Post: 04-24-2007, 03:51 PM -
Meguiar's® Makes Wheel Care "Hot" With Innovative New Polish
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 12-09-2006, 07:30 AM
Bookmarks