Results 1 to 6 of 6
Thread: cutouts.....
-
07-24-2007, 01:08 PM #1
- Join Date
- Oct 2005
- Location
- Centereach, NY
- Age
- 37
- Posts
- 184
Arctic White- 1998 Formula
cutouts.....
where can i get a good set of cutouts???
not the electric ones.......i thought there was one with some type of cable cord you wire in the cabin or something other wise ill have to get the one w/ the removable plate..
thanksIf you have the means and the desire, be prepared to do whatever it takes.
so far:
suncoast creations functional ram air setup,pacesetter LT's/ORY,magnaflow,pro 5.0,hurst stick,LS6 cam,4:10 gears/stock rear(screaming for mercy!!!)
-still more to come!!!!!!
-
07-24-2007, 05:37 PM #2
hope this helps out
http://www.ws6project.com/user_stor/...0bdf8ba9f845eb
i would only get cutouts when you get headers. and get 2 of them but you can also only put 1 in if you like in the frnt or the back, from 33-190$$
-
07-26-2007, 05:02 PM #3
I had them then cut them off! I only picked up 1 mph in the 1/4 not worth the money and is always a PITA when the things scrape on the ground, start leaking cause the gasket gets messed up and you loose the screws. If you have a free flowing exhaust your wasting your money. I had 2 of them right behind the headers where the cats use to be and was stupid loud. Ive just got striaght pipe there instead.
-
07-26-2007, 05:43 PM #4
- Join Date
- Jul 2005
- Location
- Jacksonville, FL
- Posts
- 2,723
If you want to try a cutout I'd just get one installed, under the rear passenger seat. You don't want the PCM to see any exhaust leaks around the 02 sensors. Cable operated ones probably won't seal completely, and be a nightmare to get into the car and operating properly. Electric is fine, but won't last forever - been there and just cap/uncap mine manually now. Gains over an already free-flowing exhaust will be minimal, but love the sound. Think I'll uncap mine tomorrow and scare some people going to the grocery store. Just my .02
-
07-27-2007, 03:13 AM #5
- Join Date
- Oct 2005
- Location
- Centereach, NY
- Age
- 37
- Posts
- 184
Arctic White- 1998 Formula
im in it for that retarded loud once in a while.
-
07-27-2007, 03:55 AM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
The e-cutouts are fun....
By Mr. Luos in forum Multimedia SectionReplies: 39Last Post: 07-29-2009, 07:29 PM -
cutouts
By ls1wallen in forum External EngineReplies: 2Last Post: 07-13-2009, 10:20 PM -
Cutouts open/cutouts closed
By Mr. Luos in forum Multimedia SectionReplies: 12Last Post: 03-31-2007, 02:07 PM -
cutouts...
By RyanoLS1on in forum External EngineReplies: 9Last Post: 10-19-2006, 06:12 AM -
FS...cutouts
By Demonicbird00 in forum Parts For Sale / TradeReplies: 0Last Post: 08-23-2005, 08:04 AM
Bookmarks