Results 1 to 4 of 4
Thread: Torque arm is hitting now?
-
04-29-2012, 08:32 AM #1
- Join Date
- Mar 2012
- Location
- Altoona PA
- Posts
- 25
Black- 2002
Torque arm is hitting now?
I bought a Moser 9in for my 2002 trans am. Its in but the torque arm is hitting the floor at about ride height. I have about 2 1/2 in till it hits the bump stops. I have a slp torque arm should I be running something else or is that a problem the I am going to have, what can I do.
-
05-15-2012, 04:11 PM #2
Did you get it fixed? If you're running a tunnel mount torque arm, they tend to come real close to the underside of the vehicle. Most of us have to massage the floor to create additional clearance.
Boost gets you laid, unless your name is Jon.
-
06-30-2022, 09:59 AM #3
tunnel mount torque arm doesnt it refer to factory stock arm w/ bushing and 1 long bolt to the drivers side of the 6 speed transmission. Now let me ask is that set factory i mean gonna have any way possible of comming out of the mount and tearing the exhaust system down and digging into the road and catapulting the occupants over?
-
02-09-2023, 06:46 PM #4
- Join Date
- Dec 2017
- Location
- Hinesville, GA
- Posts
- 80
We may deal with a similar torque arm issue on my friend's incoming 2002 Trans Am. It's been sitting for about 3 years and the owner has no idea what his son did. No serious rust to deal with but needed a new set of tires so he ordered a set from 4Wheelonline along with new brake pads.
Last edited by desmond; 02-09-2023 at 07:00 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: slp 3in y-pipe hitting
By 01SsRacing in forum External EngineReplies: 13Last Post: 07-16-2013, 03:30 PM -
Question: Torque arm hitting now?
By speedy30 in forum General HelpReplies: 1Last Post: 05-01-2012, 02:15 PM -
SLP Lid Hitting hood?
By Mike0202 in forum External EngineReplies: 18Last Post: 06-29-2010, 04:54 PM -
exhaust hitting
By JunkyardZ in forum External EngineReplies: 6Last Post: 06-16-2010, 07:58 PM -
Hitting Rev Limiter
By sreve in forum Automatic TransmissionReplies: 26Last Post: 10-18-2007, 06:32 PM
Bookmarks