Results 1 to 14 of 14
Thread: What is this connector for?
-
05-06-2009, 12:20 PM #1
What is this connector for?
I was vacuuming the other day and noticed this connecter underneath my dash on the driver's side. There's nothing hanging around it that isn't plugged in, although I didn't reach up and feel for a stray plug. Does anyone know what this is?
Thanks in advance!
-
05-06-2009, 12:27 PM #2
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
good sir that is for a obdII reader...it reads codes etc..it is also for tuning your car...that is a electronical link to your pcm
-
05-06-2009, 01:44 PM #3
alright, good to know!
Thank you!
-
05-06-2009, 10:14 PM #4
- Join Date
- Dec 2008
- Location
- Chicago
- Posts
- 34
Red- 1998 Firebird
[QUOTE=Bassplayer92;1916499]I was vacuuming the other day and noticed this connecter underneath my dash on the driver's side. There's nothing hanging around it that isn't plugged in, although I didn't reach up and feel for a stray plug. Does anyone know what this is?
-
05-07-2009, 06:39 AM #5
-
05-07-2009, 06:42 AM #6
-
05-07-2009, 09:38 AM #7
The only stupid question is the one that someone doesnt ask...
J2001 SS, Its not the car its the Driver that matters....
-
05-07-2009, 10:27 AM #8
thats the flux capacitor jump port actually, on 98 models anyways...
-
05-07-2009, 01:32 PM #9
-
05-10-2009, 11:41 PM #10
2002 Camaro Z28 Bolt ons, Flowmaster catback w/3" QTP electric cutout, Superchips tuned, Granatelli MAF, SLP cold air induction Lid & filter, ZEX powertune plugs, Taylor 10.4mm wires, 160 T-stat w/fan control, Eibach sportlines & BFG-KDW's on 17" SLP SS rims.
-
05-11-2009, 07:34 AM #11
"Once this baby hits 88 mph, you're going to see some serious shit."
-
05-12-2009, 07:07 AM #12I'm a CHICK with a gun and an LS1, nuff said...
1999 CAMARO SS #81 of 4829
LS6 intake * 3.73's * Borla catback * L/T Headers
ZO6 18's * MSD/NGK * SLP Lid/Bellows * KYB Adjustables
Summit Racing Springs * Fresh paint/interior in 08
-
05-12-2009, 07:15 AM #13
I love that movie, and don't feel bad, a few years ago i wouldn't of known either. No car guys in my family.
-
05-12-2009, 12:31 PM #14
It's cool, no harm done to this thick skin. I've never had to hook a car up to a computer, but I have done the old "turn the key until the code displays".
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What is this connector?
By silverWS6 in forum General HelpReplies: 6Last Post: 11-22-2009, 03:14 PM -
What for is the second connector?
By swisscheese in forum Stereo and ElectronicsReplies: 3Last Post: 05-21-2008, 12:43 PM -
Low beam connector
By dimitry2007 in forum General HelpReplies: 1Last Post: 10-07-2007, 09:26 AM -
Is this possible with a VGA connector?
By Mike Hawk in forum Almost Anything GoesReplies: 11Last Post: 02-04-2007, 03:26 AM -
WTB 5 pin maf connector???
By tooblue in forum Parts Wanted / TradeReplies: 0Last Post: 08-18-2005, 08:30 PM
Bookmarks