dynomax bullet

aPerfectTransAM · 03-23-2006, 06:27 PM

hey guys i am on summits website about to buy a bullet.... I'm not sure what the stock size of the pipes are but I was going to go with a 3in in and 3 in out bullet.. I was going to cut the stock muffler off and weld up a pipe to keep the stock tips on both sides....

aPerfectTransAM · 03-23-2006, 06:55 PM

i guess what i want to know if a 3inch inlet and 3inch outlet will work on stock piping?

**LS1Power06** · 03-23-2006, 07:09 PM

i think WS6's and SS's have 3 inches after the y-pipe but i could be wrong so some1 correct me if im wrong. if you dont have a WS6 something tells me its going to be too big, but they can put a collector on it to make the pipe fit to the inlet and outlet. oh and ull like the bullet, sounds nice!

RyAn

aPerfectTransAM · 03-23-2006, 07:13 PM

thanks for the reply. also... summit has a 16.5 and a 23.5 in length... is it better to have the longer one or it doesn't matter?

also all they have is 2 1/2 and they have 2 1/4 and 3inch... what would be the best for a stock LS1 T/A not a WS6