Results 1 to 1 of 1
-
04-13-2013, 05:44 AM #1
Front Suspension Work / Completed Rear Suspension
Finished up my rear suspension yesterday and started working on the front end. Here are some pictures on what I found once I tore into it...
stretched break line, BAD!
Came off the car relatively easy. Needed a pickle fork to pry the spindle off the ball joint on the upper control arm.
At that point the upper control arm falls right off the strut mount. As you can see its in pretty bad shape. Rusted bad enough I wouldn't reuse it.
Strut Mount as you can see isn't going to be coming apart. So picked up new ones to go with the KYB struts and BMR lowering springs. Had to also order the perch seat for the new springs as the old coil overs aren't coming apart.
Here's all the new stuff on the back end. BMR Lower Springs, Founders LCA's with Relocation Brackets and on car adjustable PHB along with KYB struts. Also replaced the rear bearings, seals and axles with new ones from Moser.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Front Suspension Work / Completed Rear Suspension
By bhunter0830 in forum Suspension and HandlingReplies: 32Last Post: 07-02-2013, 01:23 PM -
Photos after suspension work
By jad628 in forum Almost Anything GoesReplies: 7Last Post: 10-23-2012, 07:52 PM -
Need to work on my suspension
By 10spokess in forum Suspension and HandlingReplies: 15Last Post: 02-21-2010, 11:00 AM -
Help: need some help on suspension work
By need-for-speed in forum Suspension and HandlingReplies: 10Last Post: 03-25-2008, 02:45 PM -
Local Suspension Work?
By Shpoone in forum Rocky Mountain MembersReplies: 7Last Post: 06-30-2006, 04:06 PM
Bookmarks