I HAVE ASC #'s

**SMOKIN WS6** · 02-01-2007, 02:06 PM

I JUST GOT MY T/A AS WELL... IT'S A 02' TRANSAM WS6. (OR AT LEAST I THINK IT IS!!!!!) I TRIED TO LOOK AT THE DOOR FOR THE VIN# RECENTLY AND FOUND OUT THAT THE LABEL WAS TORN OF RIPPED OFF. THIS TELLS ME EITHER THE CAR WASH CRASHED BEFORE AND REPAIRED OR IT REALLY ISN'T A TRUE WS6. CAN ANYONE HELP ME FIND THE ASC# OR ANY INFORMATION PERTAINING TO THIS YEAR OR MODEL. MY LOCAL PONTIAC DEALER COULDN'T HELP MUCH! (MY VIN# IS 2G2FU22GA22169011) THANKS FOR ALL YOUR HELP!

**Black02TA** · 02-01-2007, 08:52 PM

could i get ASC # and verify its WS6 cant look at the car right now to see myself but here is vin#
2G2FV22G422164732

2002 T/A
THANKS

**Kajun Taz** · 02-04-2007, 08:31 AM

'02 WS6 T/A; red exterior/neutral interior; T-tops; A4......how rare is this one? I've been told that most red WS6's in '02 had the ebony interior and 6 speed. Just wondering how rare mine is. Thanks in advance.

**slpws6ta** · 02-27-2007, 05:25 PM

this is probly a dumb question but what is and ASC #?

**BIG_MIKE2005** · 02-28-2007, 08:40 AM

ASC is the company that started doin the WS6 conversions instead of SLP.

**FORD RECOVERY EXPERT** · 03-02-2007, 06:05 PM

**ColdWS6** · 03-06-2007, 07:45 AM

New to the site. I have severe Spring fever on my mind and the car sits in the garage under a cover whispering to me in my sleep! Damn North! 38F here today for all of you non-metric people.
My WS-6 is a 2002 with a current 348 Rwhp do to the following mods:
SLP long tube headers with Y pipe and high flow CATS- well spent other than the ground clearance issue!
Borla muffler and single exhaust tips - for that growl at 3000RPM and rumble at 1800 - leaving the house at 6:00am for work in a tidy suburban neighborhood!
SLP MAF - money well wasted
Cold Air induction - again the same
Smooth Bellow - again the same
SLP Air box - well spent
10.4mm Taylor wires - well spent as the skinny wires were an embarassment
Custom tune to get the air/fuel ratios right - well spent

Chassis - SLP bolt on Subframe connectors, SLP panhard, SLP strut brace,SLP trailing arms, SLP torque arms, SLP anti-sway bar, SLP Driveshaft loop and a set of Thrust II rims with 315/35/R17 BF TA drag radials with 1/4 spacers on the rear end!

Parts to put on before April (otherwise sitting in the Garage in boxes):
Moser rear end - 12bolt with 3:73 gears and 33 spline axles
SLP 1.85 roller rockers
Power stop slotted/dimpled rotors (front and back) with braided steel lines, SLP Line locks
Pro ATI DSC-1 SuperCharger
5 hours of Dyno to re-tune and code edit everything again!

SO it proves that I am really retarded! And that is why I really like this site!

**01WS6_4_ME** · 03-07-2007, 02:04 PM

Well, so much for stock.....

**ColdWS6** · 03-07-2007, 02:30 PM

Stock was the previous owner and I think she regretted selling me her Batmobile!
Off to the garage!! Cut knuckles and a few good f.. bombs laterI should be faster!

**01WS6_4_ME** · 03-08-2007, 03:32 PM

Git r done!

**BIG_MIKE2005** · 03-09-2007, 04:47 AM

Damn, talk about a SLP fan. I would have gona a different route. Might have gotten more for your money.

**xxtheonlyxx** · 03-09-2007, 10:08 PM

email sent

**dtilson** · 03-29-2007, 03:45 AM

I have a "02" T/A WS6 & I am looking for any/all information about it. I know it is not an SLP but it has all sorts of factory goodies on it. I bought it used (third owner) and it only had 13k miles on it. I put all of 5k on it over the 2 years. Vin#2G2FV22G122155065. Any info would help, THANKS

**00ws6m6** · 04-16-2007, 09:21 AM

looking for asc info on vin # 2g2fv22g3y2128555 any info is greatly apreciated.thanx. 00 ws6 formula silver

**mfalt38** · 04-17-2007, 04:49 AM

Originally Posted by 01WS6_4_ME

Hey Everyone your LS1 ASC guy is back!! I had no idea the board crashed and since I haven't been here in a while I thought I would come check it out. Much to my dismay I couldn't log in so now I'm back to a jr member. That sucks. Anyway, send me your vins!!! CE guys, I have almost all #'s. 01 and 02 guys, I have almost all numbers. 00 guys unfortuantely I have 2 months worth of #'s due to shady record keeping by ASC. 99 guys, I have a few more, but for reasons of the same. 98, unfortunately I have nothing. So let me know and I'll be happy to hook you up!

IMPORTANT! - 99 and 00 guys, pls send me the born on date from the driver door sticker along with your vin. TY.

"Yeah though I roll through the valley of rice, I will fear no turbo...for torque art with me! My rods and my pistons, they comfort me."

Justin Martin - LS1 ASC guy; Serving Proudly USAF

Don't :flame: me Silver 2002 Chrysler PT Cruiser Lmtd Edition w/leather, moonroof, 5 spd, traction control, 16" 5 spoke wheels, and roof rack. Will be back in an F-body or Vette asap.

**00ws6m6** · 04-17-2007, 10:56 AM

thanx man.

**Dave Schotz** · 04-17-2007, 07:24 PM

Hi... I have a '99 Formula WS6... Born on Date 8/98

VIN is 2G2FV22G0X2200794

Please feel free to email info to:
[email protected]

Thanks!

Dave

**Dave Schotz** · 04-17-2007, 07:41 PM

Hi, Looking for ASC # for my '99 Formula WS6
Born on Date: 08/98
VIN: 2G2FV22G0X2200794

Thanks!
Dave

**JohnnyBs98WS6Rag** · 04-18-2007, 12:32 PM

Check here.........

http://www.ls1tech.com/forums/showpo...16&postcount=1

(having a hard time keeping these two sites straight........)

JB

**kevinTA565** · 04-18-2007, 01:29 PM

I Was Wondering If Anyone Could Tell Me My Asc# I Have An 02' Ws6

My Vin# Is: 2g2fv22g422155674

Thanks, Kevin

Thread: I HAVE ASC #'s

Thread Tools

Looking for ASC #

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions