Results 61 to 80 of 91
Thread: Meziere Electric Water Pump
-
07-02-2008, 04:36 AM #61
- Join Date
- Jun 2008
- Location
- windsor
- Posts
- 39
Puter- 01 TA
!? That is impossible. The electric pump is a steady state device. It moves a fixed amount of volume but must move enough fluid to cool the engine at WOT meaning it's taking more energy to drive at idle and part throttle then the mechanical at idle.
Your comparison of an SC, which takes 50-200hp to drive depending on boost and style of supercharger, is completely different then changing the water pump which may draw a few horsepower from the alternator. (which is already calibrated for in the PCM)
-
07-15-2008, 06:22 PM #62
To add my vote - when I bought my WS6, it had a Meziere pump installed. I've personally put on around 15,000 miles over the past 2 years, with no problems with the pump so far. The car sees DD duty about 6 months out of the year.
-
07-16-2008, 06:04 AM #63
It's not impossible at all, if you've actually worked with these pumps you would see what I am talking about. I'm not talking about a spun up SC, of course that takes a lot of power. I'm talking about taking a tuned SC'd car and upping the pulley and seeing the difference it makes AT IDLE WHILE IT IT IS IN FULL BYPASS. Do you know what full bypass means? Do you think that a SC takes 50+ HP to drive at IDLE IN FULL BYPASS? If not, why would you possibly think it's an OK comparison?
The EWP isn't a "steady-state" device, it's an unmanaged, uncontrolled electric motor.
Look, you can argue your "theories" all you'd like. The real world shows that none of what you are posting is an issue, so clearly there is a hole in your theory.
And FWIW, alternator load is only compensated for in a STOCK car, not one with an aftermarket cam that weakens idle. Why do you think that A/C gives untuned cammed cars a fit? If this pump produced so much load, it would show up, BUT IT DOESN'T.
Readers make up your own minds here, I'm done with this thread.
-SteveLast edited by Frost; 07-16-2008 at 06:08 AM.
-
07-16-2008, 07:53 AM #64
Steve-
i am in agreement with you and so is the shop that has done work/tuning on my car. when i told them i was going to be coming to them in AUG w/ both an U/D pulley (going w/ASP) and an EWP, they said I would be very pleased with not only how it will help keep the car running cool, but that i too would be pleased with an increase in performance. however they said they could not give me an accurate number in what gains i might possibly see, but in the long run if the car runs cooler across the board in the hot TX heat then it's worth it. would gains be nice, you bet, but cooling the car is more important to me...
once i get the parts around, i'll post up how my car took to both mods, both cooling wise and performance wise...
-
08-03-2008, 06:53 PM #65
- Join Date
- Mar 2006
- Location
- Houston
- Posts
- 19
Silver SS / Blue Z06- 1999 SS 2003 Z06
So if I turn off the radio/lights reducing electrical load I will gain HP? OK
Mechanical pumps cause the coolant to cavitate at high RPM... Cavitating is a major problem with the revlimiter raised. Stock pump is designed for a specific RPM range only. We have the crossover tubes to combat the bubbles formed by cavitation but I don't like the idea of pumping bubbles/steam into the coolant lines at 6800 RPM just when I need max cooling.. Go Electric.
http://www.usmotorworks.com/pdf/WHY_PUMPS_FAIL.pdfLast edited by CitationZ06; 08-03-2008 at 07:00 PM.
-
08-11-2008, 08:20 AM #66
ASP U/D pulley and EWP (55gal, 12v) have been ordered. I'm in the process of shopping for 42 lb/hr injectors. Install of parts will be end of Aug/early Sept. Retune of course will follow with new dyno #'s (any power increase or not)...
-
08-11-2008, 08:32 AM #67Don't be afraid of the bottle!!! Be afraid of your tune!!!
-
08-11-2008, 08:39 AM #68
-
08-11-2008, 09:33 AM #69
-
08-11-2008, 11:25 AM #70
-
08-25-2008, 09:12 PM #71
my stock water pump just went at 75k
-
08-26-2008, 04:43 AM #72
Firday everything is gonna be installed (great way to start my 11 day vacation) and then I head to the dyno for a retune...
EWP, ASP U/D Pulley and Lucas 42lb/hr High Impedence injectors. Thanks to all for their input and taking the time to answer my questions...
-
08-26-2008, 02:05 PM #73
Let up know your numbers man. I am really considering a EWP so I can be a complete bolt on.
-
08-27-2008, 05:50 AM #74
i plan to post, gains or not...
-
08-27-2008, 02:04 PM #75
-
08-28-2008, 07:28 PM #76
here are a couple pics. RPM has the pulley since I dont have the tools to do the install...
-
08-29-2008, 02:02 AM #77
Can't wait to see the power numbers. Wish it was just EWP since I won't be doing injectors and have everything else but that. But beggers can't be choosers
-
08-29-2008, 01:02 PM #78
-
08-29-2008, 07:44 PM #79
Installed a Meizere Electric Water Pump (WP319 in Black), Powerbond U/D Pulley, and Lucas 42lb/hr High Impedence injectors and retune...
Other mods include:
SLP Lid
SLP Bellow
FAST 90/90 (ported)
Patriot Stage II Ls6 Style heads 59cc (2.02"int/1.57"ext)
Comp 224/224 .581/.581 112LSA
Ls6 Oil Pump (ported & shimmed)
Ls2 Timing Chain
LT's w/TSP TD's w/dual SLP LM resonators
!AIR Delete
!EGR Delete
HP Tune
Stock 10-bolt/gears...M6
Since most people care to see results comparing apples to apples, I went back to the same shop that installed the FAST 90/90 last August (2007) and retuned the car. These results are off the same dyno. I will let you decide for yourself the gains to be had. Take the difference from the FAST 90/90 or from the dyno day and draw your own conclusion...
First are the results from last years FAST 90/90 install and retune: 444/395
Second, here are the numbers from a dyno day they did last December 2007. Yes the date is incorrect. It's not from 2004. Look at the Run # file. Car is also running PIG RICH...thanks: 437/404
Finally, here are the numbers from the retune today: 458/410
So, it's all in how you want to look at it. The car gained 14rwhp/15rwtq going off the FAST 90/90 when it's know the car was tuned...
OR
The car gained 21rwhp/6rwtq going off the Dyno Day results when that shows the car clearly running RICH...
The old numbers that I used (until now) were from a Dyno Day this past March, but were from a different shop. Those numbers were 443/402 running rich as well...
So again, if you wanted to go off those numbers, the car gained 15rwhp/8rwtq...
I have provided you all with the best information that I can for you to draw your own results as to just how much these parts helped out my car. Apples to apples same dyno used, same shop doing the retune, etc...
Yes I am happy w/the gain in power, but I'm really pleased at how quick the car revs and the fact its stays at a nice cool 172° now...
Personally, I prefer to go with the results from the FAST 90/90 install/retune since I know at the time, the car was running at it's best. Just like this time around, the car today was retuned for optimum performance. So I personally am happy w/an increase of 14rwhp/15rwtq gain...
-
08-30-2008, 10:14 AM #80
Nice, congrats on the numbers, thats a healthy car. Thanks for the follow up.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Meziere Water pump
By Itllrun in forum External EngineReplies: 1Last Post: 03-19-2010, 03:27 PM -
Meziere Water Pump ?'s
By rockyiv806 in forum External EngineReplies: 3Last Post: 03-23-2007, 11:54 PM
Bookmarks