****4th of July TRAIN****

[Spaz'Bella]

Welcome to Slavery, leave your penis in her purse.

I have no use for it there LOL

[Spaz'Bella]

Abandon all hope, ye who enter here.

You poor men... who did this to you?


Maybe it is bc there is only one Spaz

Lady at license place..." is any of you under someone's guardianship bc you are mentally incompetent"...me= laughing on the floor.... Spaz: "With me we are not totally sure." Lady: "does any of you have a communicable disease?" Me... I" hope not"...Spaz..."It burns when I pee"...Me..."now you tell me" LOL That poor woman could hardly get a clear answer out of us... Thanks heavens for patient people LOL Oh... Spaz LOL She asked what level of education he had...he puts on this retard voice and says "Three" with his fingers up LOL

Hon... We are hard people LOl Mostly you LOLOLOLOLOLOL I would not miss a minute LOL

[TLS_Addict]

Worked on a roof today putting up steel for about 4 hours......then worked for a solid 5.5 hours on swapping out the EGR on my Hemi Jeep.

Dodge cant move the alternator 1/4 inch so its not a pita? I spend 3 hours getting ONE FREAKING bolt out! Dropped a wrench and had to unbolt the skid plate to get the smurfer out of there! The Jeep does run much smoother though.

What a day......

[Spaz'Bella]

Worked on a roof today putting up steel for about 4 hours......then worked for a solid 5.5 hours on swapping out the EGR on my Hemi Jeep.

Dodge cant move the alternator 1/4 inch so its not a pita? I spend 3 hours getting ONE FREAKING bolt out! Dropped a wrench and had to unbolt the skid plate to get the smurfer out of there! The Jeep does run much smoother though.

What a day......

smurfer ...lol that is too cute... of course...it might be a swearing acronym and i am sitting here picturing a wee blue guy lol

[pajeff02]

Too damn hot. I was sweating buckets prepping the T/A and swapping out to the track tires.

Dan, I dropped a nut for the alternator during the Durango coolant swap. Looked for about 5 mintes without finding it and just went and got another one out of the bin. Some things are just no worth the effort.

How are we looking for the weekend?

[ls1camino]

Apparently, we are both having comprehension issues today: http://www.ls1.com/forums/showthread...=1#post2681134

You may proceed to laugh....

I did, it was awesome.

[Zapper2003]

Need to come check out the project. Will you be around on Sunday, I might be able to sneak up while the ladies are at the horse show.

I will be somewhere. Your best bet is to call first. Should have cell service no matter where I go, if not, you can try the house as well.

[pajeff02]

That works. I'll have to head into the office Sunday morning for a bit to play catch up. We'll see how the day goes...

[Zapper2003]

Neighbors skid steer is leaking hydraulic fluid from a sending unit. Gonna change that out tomorrow night, and I don't think he'll have a chance to help me out with the final grading til saturday. Hopefully I can have an evening or two off.

[GTP231]

Worked on a roof today putting up steel for about 4 hours......then worked for a solid 5.5 hours on swapping out the EGR on my Hemi Jeep.

Dodge cant move the alternator 1/4 inch so its not a pita? I spend 3 hours getting ONE FREAKING bolt out! Dropped a wrench and had to unbolt the skid plate to get the smurfer out of there! The Jeep does run much smoother though.

What a day......

Odd I recall Hemi EGRs to be the easiest in the world

[GTP231]

Hit the links anyone?

[TLS_Addict]

Too damn hot. I was sweating buckets prepping the T/A and swapping out to the track tires.

Dan, I dropped a nut for the alternator during the Durango coolant swap. Looked for about 5 mintes without finding it and just went and got another one out of the bin. Some things are just no worth the effort.

How are we looking for the weekend?

Dave (Zappers old car) is in and Rusty said he is as well. I sure hope Rusty goes, I want my hands on that Z06! The Diplomat and Nate going as well?

You are right about the wrench. Did I mention I "made" a few tools? lol I ground down two small 10mm wrenches that broke because they were to thin and then I decided to modify a few sockets. That turned out to NOT work so well but eventually I got the damn bolt out. The Jeep is SO much smoother now. I unhooked the battery and thus it resent the trip meeter and what not but letting it sit at idle for a few minutes and then driving to Westfield, around town a few times, and then home I averaged over 20 mpgs. Gas mileage is supposed to improve. I am thinking that if FROST gets going on the Hemi engine PCM re-tuning I am going to have him beef up the Jeep a little. You are right though, some things are not worth looking for. I had everything out in 15 minutes and everything back in within 15 minutes. However.....that one bolt kicked my ass for hours. To make it easier if I ever have to do it again I shortened the one bolt. If not I you have to take the alternator off in order to back it out. I wont let you know "exactly" how I got it out. I put a few nuts on it and ground it down on the grinder to the fist nut and then backed them off to clean the last thread and it worked like a gem. I saw it on-line so thats where I got the idea.

Oh, and all of my home-made tools are now useless for anything else.

[TLS_Addict]

Odd I recall Hemi EGRs to be the easiest in the world

Perhaps on the trucks it is. The Jeep not so much. 3 of 4 bolts is a snap. The issue is that the one bolt is behind the alternator and I dont feel the need to remove that piece of shit. Just like the oil filter is at a damn angle in my Jeep, not sure if it is in the trucks or not.

Without that one bolt I would have it out and back in within 30-40 minues no problem.

[TLS_Addict]

Hit the links anyone?

Yes, played in a golf league this Monday, two matches and shot 34 and 33 for a 67 (-5) . One of Jeffs "customers" husband was my partner. I started out with a birdie and on the next hole put it in on the 2nd shot from 165 yards. Nice high 8-iron hit 1 foot in front of the hole and then rolled in. lol

So far my 3 times as a sub in the league are killing my handi. 34, 34, and 33......not looking good. Its why my dad and I got dicked in out member-member and only got 2nd. We shot -21 for two days vs. -22.

[Knight]

Mornin.

[pajeff02]

Happy Thursday!

[Spaz]

getting close to the weekend...

[konigandy6]

Almost there....

13 hour day today in 110* humid heat...

[Spaz]

Weather for Telford, PA82°F | °CPartly Cloudy Wind: SW at 6 mph Humidity: 85% getting there... hard to breath outside...

[Knight]

I went outside......had to swim to my truck.......supposed to hit 110°F today.......joy........